BSK1005

BSK1005 Bush/shackle/pin/u Bolt KIT for Ford Ranger PX I & II (t6) UTE / Dual CAB

BSK1005 Bush/shackle/pin/u Bolt KIT. Fast shipping, warranty included.

BrandRAW 4x4

Category: Suspension and 4x4 parts

RRP pending
Confirmed on order
Afterpay, Zip Pay & Zip Money available
Afterpay acceptedZip accepted — Zip Pay and Zip Money
BSK1005 Bush/shackle/pin/u Bolt KIT for Ford Ranger PX I & II (t6) UTE / Dual CAB product image

Part specs

heights
[]
positions
['Rear']
shock_types
['predator']
vehicle_count
6

The RAW 4x4 BSK1005 is a bush, shackle, pin and U-bolt kit listed to fit the PX I and PX II T6 Ranger ute. It's the hardware that mounts and locates the rear leaf springs - the bushes, shackles, pins and U-bolts that wear out or get replaced when a new leaf pack goes in.

What's in a bush, shackle, pin and U-bolt kit?

This kit bundles the mounting and locating hardware for the rear leaf springs: the bushes that the spring eyes pivot on, the shackles and pins that connect the spring to the chassis, and the U-bolts that clamp the axle to the pack. On the PX I/II T6 Ranger these are the parts that perish or need renewing, particularly when fresh leaf springs are being fitted. The same RAW 4x4 platform is shared with the Mazda BT-50 of that era, which is why you'll see both makes listed.

When would I need the BSK kit?

Owners typically reach for the BSK1005 when the rear bushes have worn, when a shackle or U-bolt set needs replacing, or alongside a new leaf pack so everything that locates the spring is renewed together. We don't list individual component dimensions in our data, so we confirm the kit contents against your PX I/II T6 Ranger rather than assume them.

Does the BSK1005 fit my Ranger?

It is listed to fit the PX I and PX II T6 Ranger in ute / dual-cab form. It is also listed against the Mazda BT-50 from the shared platform. Listings like this are a starting point, not a guarantee, so send your exact build and we'll confirm the fitment before ordering.

How does fitting work at Oak Flats?

Oak Flats Muffler Men supplies and fits RAW 4x4 spring hardware kits like the BSK1005 at our Illawarra workshop. We check the part against your Ranger, confirm what the job needs, and book the bay once fitment is verified. Pricing on the BSK1005 is confirmed by RAW 4x4 at order time rather than published in our data, so we quote you the current figure and availability before anything is ordered.

Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.

Common questions

What does the BSK1005 include?
It is a bush, shackle, pin and U-bolt kit for the rear leaf springs. Exact contents are confirmed by RAW 4x4 against your build before ordering.
Should I fit it with new leaf springs?
It's common to renew the bushes, shackles, pins and U-bolts when a new leaf pack goes in, so the whole rear spring mount is fresh. We'll advise based on your PX I/II T6 Ranger.
What vehicle is it listed for?
The PX I and PX II T6 Ranger ute, also listed against the Mazda BT-50. Confirm with the workshop first.

Fitment support across the Illawarra

Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.
Show nearby fitment areasCollapse section

Book the right exhaust job without guessing.

Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.