BSK1018

BSK1018 Bush/shackle/pin/u Bolt KIT for Ford Ranger Pj, PK UTE / Dual CAB (duratorq)

BSK1018 Bush/shackle/pin/u Bolt KIT. Fast shipping, warranty included.

BrandRAW 4x4

Category: Suspension and 4x4 parts

RRP pending
Confirmed on order
Afterpay, Zip Pay & Zip Money available
Afterpay acceptedZip accepted — Zip Pay and Zip Money
BSK1018 Bush/shackle/pin/u Bolt KIT for Ford Ranger Pj, PK UTE / Dual CAB (duratorq) product image

Part specs

heights
[]
positions
['Rear']
shock_types
[]
vehicle_count
4

Rear-end clunk and sag usually trace back to worn leaf-spring hardware, and the RAW 4x4 BSK1018 is the bush, shackle, pin and U-bolt kit to fix it on the Duratorq Ford Ranger PJ and PK ute and dual-cab.

The parts that hold a leaf pack in place

The BSK1018 is mounting hardware, not a spring. It renews the bushes the spring eyes and shackles pivot on, the pins and shackles that let the pack flex and lengthen, and the U-bolts that clamp the pack to the axle. These are consumable wear items, and on a Ranger that has carried weight over rough roads they harden, rattle and seize over time.

Why do it as a set?

Renewing the whole kit at once means the leaf pack locates cleanly and the fresh rubber isn't fighting old, hardened parts — which is exactly how the BSK1018 is bundled. It's the obvious companion job whenever springs or shocks are being replaced on a PJ/PK, since the rear is already apart.

Will the BSK1018 suit my PJ/PK Ranger?

It's listed to fit the Ford Ranger PJ and PK with the Duratorq engine in ute and dual-cab form — the generation built on shared underpinnings with Mazda. Confirm your exact chassis and configuration with the workshop before ordering, as cab and tray variants can differ.

Fitting in the Illawarra

Oak Flats Muffler Men fits leaf-spring hardware kits in-house across the Illawarra. We inspect the spring pack and axle seats with the rear up, press in the new bushes, and torque the U-bolts to spec so the BSK1018 does its job.

Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.

Common questions

What does the BSK1018 replace?
It renews the leaf-spring bushes, shackles, pins and U-bolts on a PJ/PK Duratorq Ranger — the usual source of rear clunk and sag. We confirm contents for your build.
Is it different from the RGP169?
It's a separate kit listed for this platform; we'll confirm which one matches your exact chassis before ordering.
Do you fit it locally?
Yes — we fit it at our Illawarra workshop, ideally alongside any spring or shock work.

Fitment support across the Illawarra

Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.
Show nearby fitment areasCollapse section

Book the right exhaust job without guessing.

Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.