BSK1039

BSK1039 Bush/shackle/pin/u Bolt KIT for Ford Ranger T6.2 Next GEN 4 Cyl. Excluding

BSK1039 Bush/shackle/pin/u Bolt KIT.2 Next GEN 4 Cyl. Excluding Raptor UTE / Dual CAB (BSK1039) at fits selected vehicle applications. Fast shipping, warranty included.

BrandRAW 4x4

Category: Suspension and 4x4 parts

RRP pending
Confirmed on order
Afterpay, Zip Pay & Zip Money available
Afterpay acceptedZip accepted — Zip Pay and Zip Money
BSK1039 Bush/shackle/pin/u Bolt KIT for Ford Ranger T6.2 Next GEN 4 Cyl. Excluding Raptor UTE / Dual CAB product image

Part specs

heights
[]
positions
['Rear']
shock_types
[]
vehicle_count
4

The Next-Gen Ranger still runs leaf springs at the back, and the RAW 4x4 BSK1039 is the bush, shackle, pin and U-bolt kit that mounts them — listed to fit the Ford Ranger T6.2 Next-Gen 4-cylinder dual-cab ute, excluding the Raptor. It renews the spring hardware rather than the springs.

Will the BSK1039 fit my Next-Gen Ranger?

It's listed to fit the Ford Ranger T6.2 Next-Gen in 4-cylinder dual-cab form, and the listing specifically excludes the Raptor, which runs different rear suspension. The closely related Volkswagen Amarok of this generation shares much of the platform, so hardware often overlaps. We confirm the BSK1039 against your exact build — put your MPN and variant in front of us before ordering.

What's in a spring-mounting kit?

It's the consumable hardware of a leaf-sprung rear end: bushes for the pivots, shackles and pins so the spring can move as it flexes, and U-bolts to clamp the pack to the axle. These wear and perish with load and time, letting the axle shift around. The BSK1039 renews the set so the springs are located properly again. RAW 4x4 publishes no individual sizes here, so we confirm on the vehicle.

Is it a registration concern?

No — it's mechanical spring hardware, not an emissions part, so it raises none of the catalytic-converter questions an exhaust does. If it's renewed as part of a height change, any engineering or NSW requirements come from the overall build, which we'll go through with you.

Fitting it at our Oak Flats workshop

Oak Flats Muffler Men fits these kits in-house across the Illawarra, usually when the rear springs are off so the shackles and U-bolts go on fresh. Send your build details and we'll confirm the BSK1039 suits your Next-Gen Ranger and book it in.

Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.

Common questions

Does the BSK1039 fit the Ranger Raptor?
No — the listing excludes the Raptor, which uses different rear suspension. It's listed for the T6.2 Next-Gen 4-cylinder dual-cab.
Is this the springs or just the hardware?
It's the mounting hardware — bushes, shackles, pins and U-bolts. The leaf springs are separate.
Can you fit it in the Illawarra?
Yes. We supply and fit RAW 4x4 Ranger suspension hardware at Oak Flats, usually with a spring change.

Fitment support across the Illawarra

Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.
Show nearby fitment areasCollapse section

Book the right exhaust job without guessing.

Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.