XForce Performance Exhaust System for Holden Statesman
SWDRRP$2899.00XForce Performance Exhaust System
View partE4-HV092-CBS
XForce Performance Exhaust System for Holden Commodore
XForce Performance Exhaust System
BrandXForceSWD
Category: Complete exhaust systems
RRP $1250.00 AUD
In stock at supplierAfterpay, Zip Pay & Zip Money available
Part specs
- Exit
- Twin Out
- Muffler Option
- Hotdog (Loud)
- Material Type
- 409 Stainless Steel
- System Layout
- Cat Back System
- Tube Size
- 076mm (3")
The XForce E4-HV092-CBS is a cat-back exhaust system listed to fit the Holden Commodore from 2000 to 2006. It's a complete rear-section upgrade supplied by XForce, with an RRP of $1,250.
What does this cat-back system cover?
A cat-back exhaust replaces everything from the catalytic converter rearward — the mid and rear pipework plus the mufflers — while leaving the converter and the engine-side run untouched. That makes it the section owners change first on a Commodore: it's where the note and a good part of the flow restriction live, and it can be swapped without disturbing emissions hardware. XForce hasn't published the diameter, material, or muffler layout for this E4-HV092-CBS listing, so we confirm those against the part itself before we book a fit.
Will it suit my VT or VX-era Commodore?
This system is listed to fit the Holden Commodore from 2000 to 2006. That window spans more than one Commodore series and a range of engines, and listing data can be imperfect, so it's a guide rather than a promise of a perfect bolt-on for every variant. Tell us your exact model, engine and year and we'll confirm the E4-HV092-CBS suits your car before ordering.
Is it road legal?
Being a cat-back, this system keeps the factory catalytic converter in place, which is the key piece of emissions equipment for road use. We don't hold published sound or compliance figures for this kit, so rather than make claims we can't support, we'll walk you through how it should sit on your Commodore and any state requirements before fitting.
What does fitting involve at our Illawarra workshop?
Oak Flats Muffler Men supplies and fits the E4-HV092-CBS from our Illawarra workshop. We match the listed fitment to your Commodore, check clearances and hanger points on the hoist, and book the bay once we've confirmed the kit is right. Where XForce hasn't published a spec, that hands-on check is how we make sure it's correct for your car.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- Which Commodores does the E4-HV092-CBS fit?
- It's listed to fit the Holden Commodore from 2000 to 2006. That range covers more than one series, so confirm your exact model, engine and year with the workshop before ordering.
- Does it replace the whole exhaust?
- No — it's a cat-back, so it replaces the exhaust from the catalytic converter back. The converter and engine-side pipework stay as they are.
- What does it cost?
- The RRP is $1,250. We'll confirm the final figure once we've matched it to your specific Commodore.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More complete exhaust systems the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
Xforce Catback Exhaust for VE/VF Commodore V8 Sedan/Wagon
SWDRRP$2799.00Xforce Catback Exhaust for VE/VF Commodore V8 Sedan/Wagon (Twin 3" 409 for selected vehicle applications.
View part
Xforce Exhaust for Holden Commodore VE and VF Ute Twin 3" Catback
SWDRRP$2799.00Xforce Exhaust.
View part
Xforce Catback Exhaust for VE/VF Commodore V8 Sedan/Wagon
SWDRRP$2699.00Xforce Catback Exhaust for VE/VF Commodore V8 Sedan/Wagon (Twin 2.5" 4 (E4-VF72SEDVMKCBS) Fits a wide range
View part
HOLDEN VE SS/HSV SEDAN TWIN 2.5' CAT-BACK SYSTEM WITH VAREX REAR
SWDRRP$2269.00HOLDEN VE SS/HSV SEDAN TWIN 2.5' CAT-BACK SYSTEM WITH VAREX REAR MUFFL (ES-VE07VMK-CBS) Fits a wide range
View part
Xforce Exhaust System for Holden VE/VF UTE TWIN 3" Catback System
SWDRRP$2199.00Xforce Exhaust System.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.