
EVC Throttle Controller for CHEVROLET SILVERADO (2003 - PRESENT)
SWDRRP$299.00EVC Throttle Controller.
View part
EVC Throttle Controller.
Category: Performance chips and ECU remaps

The Ultimate9 EVC535, supplied by SWD, is a throttle controller listed to fit the Chevrolet Camaro from 2009. It plugs into the accelerator-pedal harness to reshape throttle response, leaving the factory engine calibration in place.
The Camaro from 2009 runs a drive-by-wire pedal that the factory maps soft for smooth, easy low-speed driving. The EVC535 sits on that pedal signal and remaps it through selectable modes, so the same pedal travel calls for throttle sooner. It's a pedal-response change, not a remap of fuelling or boost.
It's listed to fit the Chevrolet Camaro from 2009. Throttle controllers connect at the pedal harness, so confirm your exact build and connector with the workshop before ordering to be sure the plug matches your car.
The EVC535 isn't a remap and won't alter the Camaro's published outputs. We don't quote power, torque or economy figures for it. The factory ECU calibration stays in place; what changes is how immediately the throttle answers your foot.
We supply and fit the EVC535 in-house across the Illawarra. It plugs into the accelerator harness with the controller mounted in the cabin; bring the Camaro in and we'll confirm the connector and set up the response modes. It's a clean electronic install — nothing cut or welded — and the unit carries an RRP of $299. If it's not on the shelf we can special-order it through SWD against your Camaro before booking the bay, then set the response modes with you.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.