G6898-2298

G6898 2298 Shock Absorber Nitro for Ford Ranger PX I & II (t6) UTE / Dual CAB

G6898 2298 Shock Absorber Nitro.

BrandRAW 4x4

Category: Suspension and 4x4 parts

RRP pending
Confirmed on order
Afterpay, Zip Pay & Zip Money available
Afterpay acceptedZip accepted — Zip Pay and Zip Money
G6898 2298 Shock Absorber Nitro for Ford Ranger PX I & II (t6) UTE / Dual CAB product image

Part specs

heights
['40mm']
positions
['Front']
shock_types
['nitro']
vehicle_count
2

The RAW 4x4 G6898-2298 is a nitrogen-charged Nitro-series shock absorber listed for the Ford Ranger PX I and II (T6) ute and dual-cab, built to control body movement on a working dual-cab.

What the nitro-gas charge is for

A nitrogen charge keeps the G6898-2298's damping oil under pressure, which resists the foaming that fades a shock on long corrugations. On a loaded PX Ranger that means steadier body control over rough country, where an unpressurised damper would lose its grip on the spring.

How a shock works with the PX springs

The shock damps the spring rather than carrying the load — it controls how fast the spring compresses and rebounds so the body settles after each bump. On the PX Ranger the G6898-2298 works with the factory springs at its listed position, which we confirm against your build since the front and rear run different setups.

Does the G6898-2298 suit my PX Ranger?

It's listed to fit the Ford Ranger PX I and II (T6) in ute and dual-cab form — the generation that shared its platform with Mazda. Send your exact model and we'll confirm the G6898-2298 is right for the end of the car you're doing and whether you need a pair or a full set.

Fitting at our Illawarra workshop

Oak Flats Muffler Men replaces 4x4 shocks in-house across the Illawarra. We check the mounts and bushes, fit the G6898-2298, and settle the suspension so the PX Ranger tracks straight before you drive away.

Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.

Common questions

Does the G6898-2298 fit my PX Ranger?
It's listed for the Ford Ranger PX I and II (T6) ute and dual-cab. Confirm your exact model and which axle you need with the workshop first.
What does the nitrogen charge do?
It keeps the damper oil under pressure so it resists foaming and fade on long corrugations. RAW 4x4 supplies it; Oak Flats Muffler Men fits it.
One shock or a set?
That depends on which end you're doing and your setup. We confirm the quantity when you bring the vehicle in.

Fitment support across the Illawarra

Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.
Show nearby fitment areasCollapse section

Book the right exhaust job without guessing.

Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.