G6898-2463

G6898 2463 Shock Absorber Nitro for Ford Ranger PX I & II (t6) UTE / Dual CAB

G6898 2463 Shock Absorber Nitro.

BrandRAW 4x4

Category: Suspension and 4x4 parts

RRP pending
Confirmed on order
Afterpay, Zip Pay & Zip Money available
Afterpay acceptedZip accepted — Zip Pay and Zip Money
G6898 2463 Shock Absorber Nitro for Ford Ranger PX I & II (t6) UTE / Dual CAB product image

Part specs

heights
['40mm']
positions
['Front']
shock_types
['nitro']
vehicle_count
2

Listed for the Ford Ranger PX I and II (T6) ute and dual-cab, the RAW 4x4 G6898-2463 is a Nitro-series nitrogen-charged shock absorber for keeping a PX Ranger settled under load.

Why gas charging keeps damping consistent

The G6898-2463 runs its oil under a nitrogen charge so the fluid resists cavitation — the foaming that makes a shock go soft and vague on sustained corrugations. For a PX Ranger that earns its keep, that's steadier control when it's carrying weight or working rough roads.

Where this damper fits in the suspension

A shock controls spring movement rather than supporting the vehicle, settling the body after bumps. The G6898-2463 is listed for a specific position on the PX Ranger; because the ute runs different setups front and rear, we confirm the right end and quantity for your build before fitting.

Does the G6898-2463 suit my PX Ranger?

It's listed to fit the Ford Ranger PX I and II (T6) in ute and dual-cab form — the generation that shared its platform with Mazda. The PX I and PX II run the same basic chassis, so a damper listed across both covers a long production span. Send your exact model and we'll confirm the G6898-2463 is right for the end of the car you're doing and whether you need a pair or a full set.

Fitting at our Illawarra workshop

Oak Flats Muffler Men replaces 4x4 shocks in-house across the Illawarra. Worn dampers are easy to overlook, so we inspect the mounts, bushes and the old shocks together before fitting the G6898-2463, then settle the suspension so the PX Ranger tracks straight before you drive away.

Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.

Common questions

Does the G6898-2463 fit my PX Ranger?
It's listed for the Ford Ranger PX I and II (T6) ute and dual-cab. Confirm your exact model and which axle you need with the workshop first.
What does the nitrogen charge do?
It keeps the damper oil under pressure so it resists foaming and fade on long corrugations. RAW 4x4 supplies it; Oak Flats Muffler Men fits it.
One shock or a set?
That depends on which end you're doing and your setup. We confirm the quantity when you bring the vehicle in.

Fitment support across the Illawarra

Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.
Show nearby fitment areasCollapse section

Book the right exhaust job without guessing.

Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.