HSV VE E2 Sedan Wagon 3in Catback Muffler
MPI AutomotiveRRP$4027.11HSV VE E2 Sedan Wagon 3in Catback Muffler/Muffler (SKU: SSMKHN0178) Engineered. Quality guaranteed.
View partHOLS128SR-VFHSV
Holden Commodore VF HSV Sedan 2.5in Rear Mufflers (pair)
Holden Commodore VF HSV Sedan 2.5in Rear Mufflers (pair) for selected vehicle applications.
BrandMantaMPI Automotive
Category: Mufflers and resonators
RRP $1350.88 AUD
In stock at supplierAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- HOLS128SR-VFHSV
- Supplier
- MPI Automotive
- Category
- Mufflers and resonators
- Stock status
- In stock at supplier
The MPI Automotive HOLS128SR-VFHSV is a pair of 2.5in rear mufflers built for the VF-era HSV-spec Commodore sedan. Supplied as a matched pair, they replace both rear silencers so the back of the car is changed symmetrically rather than one side at a time.
Why a matched pair of rear mufflers?
On a twin-exit HSV sedan the rear runs split left and right, so the silencing comes as a pair — one muffler per side. Replacing both at once keeps the note even across the two exits and avoids the mismatch you'd get swapping a single can. At 2.5in these are sized for the larger HSV-spec sedan, a bigger bore than a base six would carry, which is the step that suits the extra output of an HSV build.
What part of the system does this cover?
This is the rear muffler stage only — the back silencers, not a full cat-back. Mufflers quieten flow by absorption and reflection, so this pair sets the final character of the note before it leaves the twin exits. The mid-pipe and front of the HSV system stay as built; it's a targeted rear swap rather than a re-pipe.
Will it suit my VF HSV Commodore?
It's listed to fit the Holden Commodore VF in HSV sedan form. Fitment feeds can be imperfect, so send your exact HSV build and we'll confirm the rear layout, the 2.5in bore and hanger points before ordering. It's listed at $1,350.88 AUD, with supply confirmed at order.
Fitting the rear muffler pair in the Illawarra
Oak Flats Muffler Men supplies and fits rear mufflers like this in-house. With a matched pair we align both sides to the factory hangers, check the twin exits sit even under the rear bar, and confirm the 2.5in cans clear the subframe. It's listed to fit the VF HSV sedan; we verify your exact fitment rather than relying on the catalogue alone.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- Is this one muffler or two?
- Two — it's a matched pair of rear mufflers, one per side, to keep the twin-exit note even.
- Will it fit my VF HSV sedan?
- It's listed to fit the VF HSV-spec Commodore sedan. Confirm your exact HSV build with the workshop before ordering.
- Does it replace the whole system?
- No — it's the rear muffler stage only. The mid and front pipework stays as built.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More mufflers and resonators the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
Holden Commodore VE Ute & Maloo V8 3in Catback Muffler
MPI AutomotiveRRP$3830.49Holden Commodore VE Ute & Maloo V8 3in Catback Muffler/Muffler (SSMKHN0196) Fits HOLDEN. Fast.
View part
Holden Commodore VE V8 Sedan Wagon 3in Catback Muffler
MPI AutomotiveRRP$3830.49Holden Commodore VE V8 Sedan Wagon 3in Catback Muffler/Muffler (SSMKHN0170) Fits HOLDEN. Fast.
View part
HSV VE E2 Sedan Wagon 3in Catback Hotdog/Muffler
MPI AutomotiveRRP$3812.47HSV VE E2 Sedan Wagon 3in Catback Hotdog/Muffler (SKU: SSMKHN0179) Engineered. Quality guaranteed.
View part
VF HSV Ute Maloo V8 3in CatBack Muffler
MPI AutomotiveRRP$3749.44VF HSV Ute Maloo V8 3in CatBack Muffler/Muffler (SSMKHN0337) Fits HOLDEN. Fast shipping, warranty included.
View part
VF HSV V8 Sedan Wagon 3in Catback Muffler
MPI AutomotiveRRP$3749.44VF HSV V8 Sedan Wagon 3in Catback Muffler/Muffler (SKU: SSMKHN0333) Engineered. Quality guaranteed.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.