HSV VE E2 Sedan Wagon 3in Catback Muffler
MPI AutomotiveRRP$4027.11HSV VE E2 Sedan Wagon 3in Catback Muffler/Muffler (SKU: SSMKHN0178) Engineered. Quality guaranteed.
View partHOLS128UR-3-250
Holden Commodore VE VF Ute DPE 3in Rear Mufflers (pair) with 2.5" outlets
Holden Commodore VE VF Ute DPE 3in Rear Mufflers (pair) with 2.5" outlets (SKU: HOLS128UR-3-250) Engineered for
BrandMantaMPI Automotive
Category: Mufflers and resonators
RRP $1241.75 AUD
In stock at supplierAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- HOLS128UR-3-250
- Supplier
- MPI Automotive
- Category
- Mufflers and resonators
- Stock status
- In stock at supplier
The MPI Automotive HOLS128UR-3-250 is a matched pair of rear mufflers for the Holden Commodore VE/VF ute, built with a 3in body and finishing in 2.5in outlets. Supplied as a left-and-right set, it's the bolt-in rear-silencer swap for the ute body rather than a full system.
What's in the HOLS128UR-3-250 pair?
This is a two-piece set — the left and right rear mufflers that sit at the back of the VE/VF ute. Each carries a 3in body and steps to a 2.5in outlet, so the pair replaces the factory rear silencing while keeping the rest of the system as it is. Buying them as a matched pair means both sides share the same body and outlet, which keeps the tailpipe exits even under the rear of the ute tray.
What does a rear muffler swap change?
Rear mufflers are the last silencing stage before the tips. A muffler quietens by absorbing and reflecting sound inside its body, so swapping the rear pair lets you reset the note at the tail without disturbing the cat or mid-section ahead. It's the targeted change for owners who want a different rear character on the ute and a clean 2.5in outlet rather than re-piping the whole car. We can't quote a sound level — the practical move is to hear a comparable fit.
Will it suit my VE or VF ute?
It's listed to fit the Holden Commodore VE and VF in ute body. The ute has its own rear floor and hanger layout versus the sedan and wagon, so this pair is shaped for that body. Confirm your exact build and rear hanger arrangement with the workshop before ordering, since the same nameplate ran several running changes.
What does fitting involve at our Illawarra workshop?
Oak Flats Muffler Men supplies and fits the HOLS128UR-3-250 pair in-house across the Illawarra. We match each side to its hanger, set the 2.5in outlets so they exit evenly under the tray, and check clearance to the rear floor and tow gear. Bring the ute in and we'll confirm fitment and book the work.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- Is the HOLS128UR-3-250 a pair or a single muffler?
- It's a matched pair — the left and right rear mufflers for the VE/VF ute, each with a 3in body and 2.5in outlet.
- Does it replace the whole exhaust?
- No. It swaps the rear mufflers only, leaving the cat and mid-section ahead of it in place.
- Will it fit a Commodore sedan?
- It's listed for the VE/VF ute body specifically. The ute rear layout differs from the sedan, so confirm your exact body with the workshop before ordering.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More mufflers and resonators the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
Holden Commodore VE Ute & Maloo V8 3in Catback Muffler
MPI AutomotiveRRP$3830.49Holden Commodore VE Ute & Maloo V8 3in Catback Muffler/Muffler (SSMKHN0196) Fits HOLDEN. Fast.
View part
Holden Commodore VE V8 Sedan Wagon 3in Catback Muffler
MPI AutomotiveRRP$3830.49Holden Commodore VE V8 Sedan Wagon 3in Catback Muffler/Muffler (SSMKHN0170) Fits HOLDEN. Fast.
View part
HSV VE E2 Sedan Wagon 3in Catback Hotdog/Muffler
MPI AutomotiveRRP$3812.47HSV VE E2 Sedan Wagon 3in Catback Hotdog/Muffler (SKU: SSMKHN0179) Engineered. Quality guaranteed.
View part
VF HSV Ute Maloo V8 3in CatBack Muffler
MPI AutomotiveRRP$3749.44VF HSV Ute Maloo V8 3in CatBack Muffler/Muffler (SSMKHN0337) Fits HOLDEN. Fast shipping, warranty included.
View part
VF HSV V8 Sedan Wagon 3in Catback Muffler
MPI AutomotiveRRP$3749.44VF HSV V8 Sedan Wagon 3in Catback Muffler/Muffler (SKU: SSMKHN0333) Engineered. Quality guaranteed.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.