Toyota Landcruiser 200 Series V8 4.7L Petrol 2008 to Sep 2015 - Twin 2
PacemakerRRP$3938.50Toyota Landcruiser 200 Series V8 4.7L Petrol 2008 to Sep 2015 - Twin 2 1/2" with Cats and Headers Kit.
View partKB12028-HCMR
Toyota Landcruiser 100 Series V8 4.7L Petrol 1998/2008 - Single 3" with Cats and Headers
Toyota Landcruiser 100 Series V8 4.7L Petrol 1998/2008 - Single 3" with Cats and Headers Kit.
BrandPacemaker
Category: Extractors and headers
RRP $3899.88 AUD
Confirmed on orderAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- KB12028-HCMR
- Supplier
- Pacemaker
- Category
- Extractors and headers
- Vehicle fitment
- Toyota 100 Series V8 Petrol (UZJ100R)
- Stock status
- Confirmed on order
The Pacemaker KB12028-HCMR is a single 3in headers-and-system kit listed to fit the Toyota Landcruiser 100 Series V8 4.7L petrol (1998–2008). It pairs tubular extractors with a 3in pipe and retains the catalytic converters.
What are headers and what does this kit change?
Headers, also called extractors, swap the cast factory exhaust manifolds for separate tubular runners off each cylinder, the idea being to let the engine breathe out with less restriction than the cast originals. The KB12028-HCMR goes further than a bare set of extractors: it is a kit that carries the gas back through a single 3in pipe, so it covers the headers and the system behind them in one part. It changes the exhaust side of the engine, not anything internal.
What does keeping the cats mean here?
This is the with-cats version of the kit, so the catalytic converters stay in the system. On a road-registered petrol wagon like the 100 Series Landcruiser, the cats are the emissions hardware the vehicle left the factory with, and this kit is built to keep them in place rather than delete them. Confirm with the workshop how your specific build is set up before ordering.
Will it suit my Toyota Landcruiser 100 Series?
The KB12028-HCMR is listed to fit the Toyota Landcruiser 100 Series with the 4.7L V8 petrol engine, covering the 1998–2008 era of that wagon. It is a significant fitment, so confirm your exact engine and build with the workshop before ordering rather than going off the year alone.
What does fitting involve at our Illawarra workshop?
Oak Flats Muffler Men fits header kits like the KB12028-HCMR in-house across the Illawarra. A V8 header job needs good access to drop the factory manifolds, fresh gaskets, and the single 3in run lined up cleanly behind the extractors with the cats retained. Supplied by Pacemaker at $3,899.88 AUD; send us your Landcruiser's details and we'll confirm the fit and book the bay.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- What does the KB12028-HCMR fit?
- It is listed to fit the Toyota Landcruiser 100 Series 4.7L V8 petrol (1998–2008). Confirm your exact engine and build with the workshop before ordering.
- Does this kit keep the catalytic converters?
- Yes — this is the with-cats version, so the catalytic converters are retained rather than deleted.
- Is it just the headers?
- No — it is a kit, pairing the tubular headers with a single 3in system behind them.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
Toyota Landcruiser 100 Series V8 4.7L Petrol 1998/2008 - Single 3"
PacemakerRRP$3207.09Toyota Landcruiser 100 Series V8 4.7L Petrol 1998/2008 - Single 3" with CAT Delete Pipes and Headers Kit.
View part
Toyota Prado 120 Series 4L V6 Petrol 2002 to 2009 - Single 2 1/2" CAT
PacemakerRRP$2491.26Toyota Prado 120 Series 4L V6 Petrol 2002 to 2009 - Single 2 1/2" CAT Delete with Headers Kit.
View part
Toyota Landcruiser Troopy 75 Series 6 Cyl 4.2L Non Turbo - Single 2 1/2"
PacemakerRRP$2187.52Toyota Landcruiser Troopy 75 Series 6 Cyl 4.2L Non Turbo - Single 2 1/2" with EGR Headers Kit. (SKU: KB12001-HMX), $2187.52 from Pacemaker.
View part
Toyota Landcruiser Troopy 75 Series 6 Cyl 4.2L Non Turbo - Single 2 1/2
PacemakerRRP$2157.06Toyota Landcruiser Troopy 75 Series 6 Cyl 4.2L Non Turbo - Single 2 1/2 System with Headers Kit.
View part
Toyota Prado 120 Series 4L V6 Petrol 2002 to 2009 - Single 2 1/2" Cat
PacemakerRRP$2103.94Toyota Prado 120 Series 4L V6 Petrol 2002 to 2009 - Single 2 1/2" Cat Back with Headers Kit.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.