Ford Mustang Coupe 2015 to 2017 5.0L Headers, Cats And Twin 3"Inch
PacemakerRRP$4866.88Pacemaker Ford Mustang Coupe 2015 to 2017 5.0L Headers, Cats And Twin 3"Inch System LH Drive Only.
View partKB4006-HXMX
Ford Maverick - DA 4.2L Petrol and Diesel 1987 to 1993 (Short Wheel Base) Wagon - Single
Ford Maverick - DA 4.2L Petrol and Diesel 1987 to 1993 (Short Wheel Base) Wagon - Single 2 1/2"with Headers Kit (KB4006-HXMX) at $1723.74 RRP.
BrandPacemaker
Category: Extractors and headers
RRP $1723.74 AUD
Confirmed on orderAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- KB4006-HXMX
- Supplier
- Pacemaker
- Category
- Extractors and headers
- Vehicle fitment
- Ford DA
- Stock status
- Confirmed on order
The Pacemaker KB4006-HXMX is a header kit built for the short-wheelbase Ford Maverick DA wagon, the tighter of the two DA bodies. Its distinguishing job is packaging the 2in primaries and single 2½in system into the shorter chassis, where pipe routing under a stubbier floor is the real fitment question.
What sets the short-wheelbase kit apart?
On the DA Maverick the wheelbase changes the run length from the headers to the tail, and this KB4006-HXMX is the short-wheelbase version. The 2in primaries and single 2½in pipework are sized for the 4.2L six, but the shorter floor and rear-axle position dictate how the system is hung — that's the variable the short-body kit accounts for.
Petrol and diesel 4.2L — what's covered?
This kit is listed for the 4.2L Maverick DA in both petrol and diesel form across 1987 to 1993. The header replaces the cast manifold with tubular primaries; supplied as a kit, it includes the pipework and hardware to complete the section rather than just the header casting. Confirm petrol-versus-diesel specifics with the workshop, as the engine variant affects the front of the run.
Is it road legal?
This is a header kit, not a cat-delete on a road-relevant system, so there's no off-road-only disclosure attached to the part itself. State compliance for header changes still varies, so confirm your registration requirements with the workshop before fitting.
What does fitting the short-wheelbase kit involve in the Illawarra?
Oak Flats Muffler Men fits these Pacemaker kits on-site. The short-wheelbase routing means the 2½in single run and 2in primaries are checked against your DA's floor and crossmember before the bay is booked. Send your exact build — petrol or diesel, short body — and we'll confirm the listed fitment.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- Which Maverick body is the KB4006-HXMX for?
- It's the short-wheelbase DA wagon kit — the tighter body, with routing sized to that shorter chassis.
- Does it suit both petrol and diesel?
- It's listed for the 4.2L Maverick DA in petrol and diesel, 1987–1993. Confirm your engine variant with the workshop.
- Is the header supplied as a complete kit?
- Yes — it's a header kit, so it includes the pipework and hardware to complete the section, not just the header.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
Ford Mustang Convertible 2015 Onward 5.0L Headers, Cats And Twin 3"Inch
PacemakerRRP$4866.88Ford Mustang Convertible 2015 Onward 5.0L Headers, Cats And Twin 3"Inch System LH Drive Only (SKU: PP4175-52), $4866.88 from Pacemaker. Engineered
View part
Ford Mustang Coupe 2015 to 2017 5.0L Headers, Cats And Twin 3"Inch
PacemakerRRP$4855.20Ford Mustang Coupe 2015 to 2017 5.0L Headers, Cats And Twin 3"Inch System RH Drive Only.
View part
Ford Mustang Convertible 2015 to 2017 5.0L Headers, Cats And Twin 3"Inch
PacemakerRRP$4855.20Ford Mustang Convertible 2015 to 2017 5.0L Headers, Cats And Twin 3"Inch System RH Drive Only (SKU: PP4178-54), $4855.20 from Pacemaker. Engineered
View part
Ford Mustang Coupe 2015 to 2017 5.0L Headers, Cats And Twin 2 1/2 Inch
PacemakerRRP$4753.74Pacemaker Ford Mustang Coupe 2015 to 2017 5.0L Headers, Cats And Twin 2 1/2 Inch System to Suit RH Drive Only.
View part
Ford Mustang Convertible 2015 to 2017 5.0L Headers, Cats And Twin 2 1/2
PacemakerRRP$4753.74Ford Mustang Convertible 2015 to 2017 5.0L Headers, Cats And Twin 2 1/2 Inch System To Suit RH Drive Only.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.