Mazda BT-50 3.2L (P5AT) TD 2011 to 2016 - Single 3" Kit with Cat
PacemakerRRP$1758.60Mazda BT-50 3.2L (P5AT) TD 2011 to 2016 - Single 3" Kit with Cat and Centre Resonator.
View partKB8010-XXXR
Mazda BT-50 3.2L (P5AT) TD 2011 to 2016 - Single 3" Kit with Centre Resonator
Mazda BT-50 3.2L (P5AT) TD 2011 to 2016 - Single 3" Kit with Centre Resonator (SKU: KB8010-XXXR), $1465.87 from Pacemaker.
BrandPacemaker
Category: Mufflers and resonators
RRP $1465.87 AUD
Confirmed on orderAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- KB8010-XXXR
- Supplier
- Pacemaker
- Category
- Mufflers and resonators
- Vehicle fitment
- Mazda UP
- Stock status
- Confirmed on order
The Pacemaker KB8010-XXXR is a 3in single system built around a centre resonator, listed to fit the Mazda BT-50 3.2L (P5AT turbo-diesel, 2011–2016). The resonator is the headline: it is a tuning device, not a packed muffler, so it cuts the diesel drone frequencies while keeping the run free-flowing.
What is a centre resonator and what does it change?
A resonator works by interference rather than absorption. Where a chambered muffler forces gas through baffles to deaden volume, a resonator is tuned to cancel a narrow band of frequencies — the ones that turn into the low boom you hear at a steady cruise. Mounting it centrally lets it treat the note early in the run. The result on a P5AT 3.2L is a system that quietens the worst of the diesel drone without the broader muffling that a full muffler imposes.
What's the cat situation on this variant?
Pacemaker has not published a catalytic-converter spec for the KB8010-XXXR, so we do not state one. This is the centre-resonator kit; whether your build needs a converter retained for road use is something to confirm directly, and we will not guess at emissions hardware that the supplier has not listed.
Will it suit my Mazda BT-50?
It is listed to fit the Mazda BT-50 3.2L P5AT turbo-diesel from 2011 to 2016. Feed data is a starting point, not a promise — send your exact year and build to the workshop and we will confirm the system lines up with your truck before ordering.
What does fitting involve at our Illawarra workshop?
Oak Flats Muffler Men supplies and fits this Pacemaker resonator system in-house across the Illawarra. We confirm hanger and clearance positions, check the 3in run sits cleanly along the chassis, and book the bay once your build is verified. The RRP for the KB8010-XXXR is listed; any state road-compliance question is one to settle before fitting.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- What does the resonator in the KB8010-XXXR actually do?
- It's a tuning device that cancels specific drone frequencies at cruise, rather than absorbing volume across the board like a chambered muffler.
- Does this kit include a catalytic converter?
- The supplier hasn't published a cat spec for the KB8010-XXXR, so we don't state one. Confirm what your road build needs with the workshop.
- Does it fit the 3.2L BT-50?
- It's listed to fit the Mazda BT-50 3.2L P5AT from 2011–2016. Confirm your exact variant with us before ordering.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More mufflers and resonators the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
Mazda BT-50 3L (4JJ3-TCX) 2020 to 2025 (DPF Back) Exhaust with Resonator
PacemakerRRP$1304.83Mazda BT-50 3L (4JJ3-TCX) 2020 to 2025 (DPF Back) Exhaust with Resonator. Fast.
View part
Mazda BT-50 3L (4JJ3-TCX) 2020 to 2025 (DPF Back) Exhaust with Muffler
PacemakerRRP$1304.83Mazda BT-50 3L (4JJ3-TCX) 2020 to 2025 (DPF Back) Exhaust with Muffler. Fast.
View part
Mazda BT-50 3L (4JJ3-TCX) 2020 to 2025 (DPF Back) Exhaust No Mufflers
PacemakerRRP$1186.35Mazda BT-50 3L (4JJ3-TCX) 2020 to 2025 (DPF Back) Exhaust No Mufflers.
View part
Mazda BT-50 3.2L (P5AT) TD 2016 to 2020 DPF Model - Single 3" (DPF Back)
PacemakerRRP$695.89Mazda BT-50 3.2L (P5AT) TD 2016 to 2020 DPF Model - Single 3" (DPF Back) Exhaust System With Muffler.
View part
Mazda BT-50 3.2L (P5AT) TD 2016 to 2020 DPF Model - Single 3" (DPF Back)
PacemakerRRP$695.89Pacemaker Australia Mazda BT-50 3.2L (P5AT) TD 2016 to 2020 DPF Model - Single 3" (DPF Back) Exhaust System With Resonator.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.