Nissan Patrol Y62 5.6 Litre V8 2017-Current (Series 4-5) - Single 3"
PacemakerRRP$4401.19Nissan Patrol Y62 5.6 Litre V8 2017-Current (Series 4-5) - Single 3" With Headers, Cats, Wiring Extensions and Engine Light Adaptors Kit.
View partKB9415-HXMR
Nissan Navara D40 4L Petrol Dual Cab/King Cab TD 2006 to 2016 - Single 2 1/2"
Nissan Navara D40 4L Petrol Dual Cab/King Cab TD 2006 to 2016 - Single 2 1/2" with Headers Kit.
BrandPacemaker
Category: Extractors and headers
RRP $2210.01 AUD
Confirmed on orderAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- KB9415-HXMR
- Supplier
- Pacemaker
- Category
- Extractors and headers
- Vehicle fitment
- Nissan D40 4L V6 Petrol
- Stock status
- Confirmed on order
The Pacemaker KB9415-HXMR is a header kit listed to fit the Nissan Navara 4L (dual cab, 2006–2016). Supplied as a kit, it pairs the extractors with the pipework needed to complete the run.
What's an extractor and what does it change?
This is sold as a kit, so the KB9415-HXMR bundles the tuned extractors with the pipework needed to join them to the rest of the system on the Nissan Navara. Extractors swap out the cast factory manifolds for separated tube runners, which lets the exhaust pulses from each cylinder clear without crowding each other. The honest trade-off is heat and sound: open tube near the bay runs hotter than a cast manifold, and the exhaust note firms up over standard.
Will it suit my Nissan Navara?
The KB9415-HXMR is listed to fit the Nissan Navara 4L (dual cab, 2006–2016). Extractor fitment is dimensionally fussy — it has to clear steering, sumps, crossmembers and, on this listing, the specific bodystyle — so treat the fit as "listed to fit" rather than guaranteed. Send your build details to the workshop and we'll confirm the exact variant before anything is ordered.
Is it road legal?
Whether an extractor change stays road-compliant depends on the specific vehicle, its emissions equipment and how the rest of the system is configured, none of which this listing spells out in full. We won't claim blanket road legality we can't verify from the data, so the honest answer is to confirm the compliance position for your exact Nissan Navara with the workshop before committing.
What does fitting involve at our Illawarra workshop?
Oak Flats Muffler Men supplies and fits Pacemaker extractors in-house at our Illawarra workshop, and the KB9415-HXMR carries a recommended retail of $2210.01 AUD. Big-ticket extractor work like this is usually a special-order item, so we confirm the right part number against your vehicle, order it in, then book the bay to fit and check clearances. Because it's "listed to fit" rather than guaranteed, that confirmation step is where we catch any variant differences before the spanner comes out.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- Will the KB9415-HXMR fit my Nissan Navara?
- It's listed to fit the Nissan Navara 4L (dual cab, 2006–2016). Extractor clearances are tight, so confirm your exact variant with the workshop before ordering.
- Are these extractors road legal on my car?
- That depends on your specific vehicle and emissions setup, which this listing doesn't fully state. The workshop will confirm the compliance position for your build before fitting.
- What does the KB9415-HXMR cost and how do I get it fitted?
- The recommended retail is $2210.01 AUD. It's typically special-ordered, so contact Oak Flats Muffler Men in the Illawarra to confirm the part for your vehicle and book the fit.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
Nissan Patrol Y62 5.6 Litre V8 2013 to 2017 (Series 1-3) - Single 3"
PacemakerRRP$4398.61Pacemaker Nissan Patrol Y62 5.6 Litre V8 2013 to 2017 (Series 1-3) - Single 3" with Headers, CATS, Wiring Extensions and Engine Light Adaptors.
View part
Nissan Patrol GQ 4.2L N/A 1987 to 1997 (Long Wheel Base Petrol EFI)
PacemakerRRP$2303.75Nissan Patrol GQ 4.2L N/A 1987 to 1997 (Long Wheel Base Petrol EFI) Wagon - Single 2 1/2" with Headers and CAT Kit.
View part
Nissan Patrol Y62 5.6 Litre V8 2013 to current - Single 3" Manifold Cat
PacemakerRRP$2020.38Pacemaker Nissan Patrol Y62 5.6 Litre V8 2013 to current - Single 3" Manifold Cat Back Kit.
View part
Nissan Patrol GQ 4.2L N/A 1987 to 1997
PacemakerRRP$1957.79Nissan Patrol GQ 4.2L N/A 1987 to 1997 (Long Wheel Base Petrol non EFI and Diesel) Wagon - Single 2 1/2" with Headers Kit. (KB9505-HXMX) at $1957.79.
View part
Nissan Patrol GQ 4.2L N/A 1987 to 1997 (Short Wheel Base) Wagon - Single
PacemakerRRP$1723.74Nissan Patrol GQ 4.2L N/A 1987 to 1997 (Short Wheel Base) Wagon - Single 2 1/2" with Headers Kit.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.