HSV VE E2 Sedan Wagon 3in Catback Muffler
MPI AutomotiveRRP$4027.11HSV VE E2 Sedan Wagon 3in Catback Muffler/Muffler (SKU: SSMKHN0178) Engineered. Quality guaranteed.
View partMBM597PHD
D-Max 3.0L Holden Colorado RG 3in Centre Hotdog
D-Max 3.0L Holden Colorado RG 3in Centre Hotdog for selected vehicle applications.
BrandMantaMPI Automotive
Category: Mufflers and resonators
RRP $470.76 AUD
In stock at supplierAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- MBM597PHD
- Supplier
- MPI Automotive
- Category
- Mufflers and resonators
- Stock status
- In stock at supplier
At 3in, the MPI Automotive MBM597PHD is a centre hotdog resonator sized for a larger-bore diesel run, listed to fit the 3.0L Isuzu D-Max and Holden Colorado RG. The 3in bore is the headline here — it's built to sit in a 3in system and trim drone without pinching flow.
Why does the 3in bore matter?
This hotdog is built to a 3in bore, matching a 3in centre section on a 3.0L turbo-diesel ute. Keeping the resonator at the same diameter as the pipe avoids a flow step, so the gas a common-rail diesel pushes at low rpm stays moving while the hotdog cancels the resonant boom. We quote only the published 3in figure for this part and don't compare it to other sizes.
What does a centre hotdog do?
A hotdog is a straight-through resonator — a perforated core in absorptive packing — that targets a band of drone rather than reducing volume broadly like a chambered muffler. Placed in the centre of the D-Max or Colorado run, it does the early drone work for a quieter cabin on the highway while leaving the rest of the system free-flowing.
Will it suit my D-Max or Colorado RG?
The MBM597PHD is listed to fit the 3.0L Isuzu D-Max and Holden Colorado RG, which share much of their diesel driveline. It's a centre-section component, so confirm your current 3in pipe sizing and section spacing with the workshop, since prior exhaust work changes how it slips in.
What does fitting involve at our Illawarra workshop?
Oak Flats Muffler Men fits 3in centre hotdogs like this in-house across the Illawarra. We verify the 3in routing, set the unit for clearance under the tray and over the diff, and seal the slip joints. RRP is $470.76; bring the ute in and we'll measure up before booking.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- What bore is the MBM597PHD?
- It's built to a 3in bore as published by the supplier, sized to match a 3in centre section on a 3.0L turbo-diesel.
- Is it a muffler or a resonator?
- It's a straight-through hotdog resonator. It targets cabin drone while keeping flow free, so it tunes the note rather than cutting volume broadly.
- Does it fit the Colorado RG and D-Max?
- It's listed to fit the 3.0L Isuzu D-Max and Holden Colorado RG. Confirm your exact build and 3in pipe sizing with the workshop before ordering.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More mufflers and resonators the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
Holden Commodore VE Ute & Maloo V8 3in Catback Muffler
MPI AutomotiveRRP$3830.49Holden Commodore VE Ute & Maloo V8 3in Catback Muffler/Muffler (SSMKHN0196) Fits HOLDEN. Fast.
View part
Holden Commodore VE V8 Sedan Wagon 3in Catback Muffler
MPI AutomotiveRRP$3830.49Holden Commodore VE V8 Sedan Wagon 3in Catback Muffler/Muffler (SSMKHN0170) Fits HOLDEN. Fast.
View part
HSV VE E2 Sedan Wagon 3in Catback Hotdog/Muffler
MPI AutomotiveRRP$3812.47HSV VE E2 Sedan Wagon 3in Catback Hotdog/Muffler (SKU: SSMKHN0179) Engineered. Quality guaranteed.
View part
VF HSV Ute Maloo V8 3in CatBack Muffler
MPI AutomotiveRRP$3749.44VF HSV Ute Maloo V8 3in CatBack Muffler/Muffler (SSMKHN0337) Fits HOLDEN. Fast shipping, warranty included.
View part
VF HSV V8 Sedan Wagon 3in Catback Muffler
MPI AutomotiveRRP$3749.44VF HSV V8 Sedan Wagon 3in Catback Muffler/Muffler (SKU: SSMKHN0333) Engineered. Quality guaranteed.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.