HSV VE E2 Sedan Wagon 3in Catback Muffler
MPI AutomotiveRRP$4027.11HSV VE E2 Sedan Wagon 3in Catback Muffler/Muffler (SKU: SSMKHN0178) Engineered. Quality guaranteed.
View partMKHN0023
Holden Commodore VL Commodore 3.0L 6 Cylinder 2.5in Catback Muffler
Holden Commodore VL Commodore 3.0L 6 Cylinder 2.5in Catback Muffler/Muffler (MKHN0023) Fits HOLDEN.
BrandMantaMPI Automotive
Category: Mufflers and resonators
RRP $735.52 AUD
In stock at supplierAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- MKHN0023
- Supplier
- MPI Automotive
- Category
- Mufflers and resonators
- Vehicle fitment
- Holden
- Stock status
- In stock at supplier
The MPI Automotive MKHN0023 is a 2.5in cat-back with twin mufflers for the VL Holden Commodore, 3.0L six-cylinder. The 2.5in bore is the more moderate option for the naturally aspirated VL six — fresh pipework sized for a near-stock engine rather than a big-bore build.
What does the 2.5in bore suit?
At 2.5in this cat-back is the mid-size bore, keeping gas speed up for everyday driving on the 3.0L six while still renewing the rear of the system. It suits a VL that is close to standard, where a larger pipe is not needed. Two mufflers in the run keep the note subdued, so it is the quieter, more moderate of the cat-back options for the naturally aspirated six.
What does a cat-back cover?
Cat-back means the section from the catalytic-converter flange rearward is renewed — intermediate pipe, mufflers and tailpipe — while the cat and front section stay as fitted, leaving the emissions hardware in place. The twin-muffler layout spreads the silencing along the run for a controlled note on the 2.5in bore.
Will it suit my VL Commodore?
It is listed to fit the VL Commodore with the 3.0L six-cylinder. Confirm your exact model, year and that it is the naturally aspirated six rather than the turbo with the workshop before ordering.
What does fitting involve at our Illawarra workshop?
Oak Flats Muffler Men fits this 2.5in VL cat-back in-house across the Illawarra. We check the cat flange, the position of both mufflers and the hangers along the floor, then mount it square. Send your model and year and we will confirm fitment and book the bay.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- Why the 2.5in bore on the VL six?
- The 2.5in is the more moderate bore, suited to a near-stock 3.0L six where a larger pipe isn't needed. The twin mufflers keep it quiet.
- Is it for the turbo or non-turbo VL?
- It is listed for the naturally aspirated 3.0L six-cylinder VL. Confirm with the workshop that you don't have the turbo car.
- Does it keep the cat?
- Yes — it is a cat-back, so the factory cat and front section stay in place.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More mufflers and resonators the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
Holden Commodore VE Ute & Maloo V8 3in Catback Muffler
MPI AutomotiveRRP$3830.49Holden Commodore VE Ute & Maloo V8 3in Catback Muffler/Muffler (SSMKHN0196) Fits HOLDEN. Fast.
View part
Holden Commodore VE V8 Sedan Wagon 3in Catback Muffler
MPI AutomotiveRRP$3830.49Holden Commodore VE V8 Sedan Wagon 3in Catback Muffler/Muffler (SSMKHN0170) Fits HOLDEN. Fast.
View part
HSV VE E2 Sedan Wagon 3in Catback Hotdog/Muffler
MPI AutomotiveRRP$3812.47HSV VE E2 Sedan Wagon 3in Catback Hotdog/Muffler (SKU: SSMKHN0179) Engineered. Quality guaranteed.
View part
VF HSV Ute Maloo V8 3in CatBack Muffler
MPI AutomotiveRRP$3749.44VF HSV Ute Maloo V8 3in CatBack Muffler/Muffler (SSMKHN0337) Fits HOLDEN. Fast shipping, warranty included.
View part
VF HSV V8 Sedan Wagon 3in Catback Muffler
MPI AutomotiveRRP$3749.44VF HSV V8 Sedan Wagon 3in Catback Muffler/Muffler (SKU: SSMKHN0333) Engineered. Quality guaranteed.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.