HSV VE E2 Sedan Wagon 3in Catback Muffler
MPI AutomotiveRRP$4027.11HSV VE E2 Sedan Wagon 3in Catback Muffler/Muffler (SKU: SSMKHN0178) Engineered. Quality guaranteed.
View partMKHN0132
VY HSV V8 Sedan 2.5in Dual Catback Muffler
VY HSV V8 Sedan 2.5in Dual Catback Muffler/Muffler.
BrandMantaMPI Automotive
Category: Mufflers and resonators
RRP $1267.92 AUD
In stock at supplierAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- MKHN0132
- Supplier
- MPI Automotive
- Category
- Mufflers and resonators
- Vehicle fitment
- Holden
- Stock status
- In stock at supplier
The MPI Automotive MKHN0132 is the twin-muffler 2.5in dual cat-back for the VY HSV V8 sedan. Two boxes in each line on the tighter bore make it the most subdued of the 2.5in dual layouts for the VY.
What does running two mufflers per side achieve?
A muffler-into-muffler layout puts two silencing stages in each pipe, so across a dual the V8 passes through four boxes of absorption and reflection. That shapes the note harder than a single-muffler run, making the MKHN0132 the quietest, most factory-like of the VY 2.5in dual options. We won't put a number on the volume; hearing a comparable twin-muffler fit is the honest gauge.
Why the 2.5in dual bore?
Two-and-a-half inches is the tighter pipe, holding gas speed up for low-down and mid-range response on a street V8. Run as a dual with twin mufflers it pairs twin exits with a measured note and near-stock pipe size — a tidy replacement rather than a louder, freer system. It stays a cat-back, so the catalytic converter and front pipework are retained as the factory fitted them.
Will it fit my VY HSV sedan?
It's listed to fit the VY HSV V8 sedan. The dual routing and hanger spacing are particular to that body; confirm your exact build with the workshop before ordering, since the VY HSV range ran several variants.
How do we fit it in the Illawarra?
Oak Flats Muffler Men supplies and fits the MKHN0132 in-house across the Illawarra. We hang both pipes and all four mufflers on the car's mounts, check clearance to the floor and rear valance on each side, and join every stage square. Bring the car in and we'll confirm fitment and book the bay.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- How many mufflers does the MKHN0132 run?
- Two per side across a dual layout — four in total — making it the most subdued of the VY 2.5in dual options.
- What bore is it?
- It's 2.5in per pipe, holding gas speed up for low-down and mid-range response.
- Does it keep the catalytic converter?
- Yes — as a cat-back, the factory converter and front pipework stay in place.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More mufflers and resonators the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
Holden Commodore VE Ute & Maloo V8 3in Catback Muffler
MPI AutomotiveRRP$3830.49Holden Commodore VE Ute & Maloo V8 3in Catback Muffler/Muffler (SSMKHN0196) Fits HOLDEN. Fast.
View part
Holden Commodore VE V8 Sedan Wagon 3in Catback Muffler
MPI AutomotiveRRP$3830.49Holden Commodore VE V8 Sedan Wagon 3in Catback Muffler/Muffler (SSMKHN0170) Fits HOLDEN. Fast.
View part
HSV VE E2 Sedan Wagon 3in Catback Hotdog/Muffler
MPI AutomotiveRRP$3812.47HSV VE E2 Sedan Wagon 3in Catback Hotdog/Muffler (SKU: SSMKHN0179) Engineered. Quality guaranteed.
View part
VF HSV Ute Maloo V8 3in CatBack Muffler
MPI AutomotiveRRP$3749.44VF HSV Ute Maloo V8 3in CatBack Muffler/Muffler (SSMKHN0337) Fits HOLDEN. Fast shipping, warranty included.
View part
VF HSV V8 Sedan Wagon 3in Catback Muffler
MPI AutomotiveRRP$3749.44VF HSV V8 Sedan Wagon 3in Catback Muffler/Muffler (SKU: SSMKHN0333) Engineered. Quality guaranteed.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.