HSV VE E2 Sedan Wagon 3in Catback Muffler
MPI AutomotiveRRP$4027.11HSV VE E2 Sedan Wagon 3in Catback Muffler/Muffler (SKU: SSMKHN0178) Engineered. Quality guaranteed.
View partMKHN0175
HSV VE E2 SDN Wagon 2.5in Catback Hotdog/Muffler
HSV VE E2 SDN Wagon 2.5in Catback Hotdog/Muffler (MKHN0175) Fits HOLDEN. Fast shipping, warranty included.
BrandMantaMPI Automotive
Category: Mufflers and resonators
RRP $2379.66 AUD
In stock at supplierAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- MKHN0175
- Supplier
- MPI Automotive
- Category
- Mufflers and resonators
- Vehicle fitment
- Holden
- Stock status
- In stock at supplier
The MPI Automotive MKHN0175 is a 2.5in cat-back for the HSV VE E2 sedan and wagon, pairing a hotdog resonator with a rear muffler. The hotdog tunes out drone while the rear muffler does the silencing — a two-stage layout on the tighter, near-stock bore.
What does the hotdog do on the E2?
A hotdog is a compact straight-through resonator: gas passes through a perforated core rather than around baffles, so it targets a drone frequency without restricting flow. On the VE E2 it sits ahead of the rear muffler, easing mid-range resonance through the cabin before the rear box sets the final note. It's the stage that keeps the system civil on the open road while letting the engine breathe.
Why the 2.5in bore?
Two-and-a-half inches is the tighter pipe option, holding gas speed up for low-down and mid-range response rather than chasing top-end flow. With the hotdog-and-muffler pairing it's a balanced, near-factory-sized system rather than a loud, stripped one. It stays a cat-back, so the catalytic converter and front pipework are retained. We can't quote a sound figure; a comparable fit is the honest reference.
Will it suit my HSV VE E2 sedan or wagon?
It's listed to fit the HSV VE E2 in sedan and wagon body. The wagon's rear floor routes differently from the sedan, and this system is built to cover both; confirm your exact build with the workshop before ordering.
How do we fit it in the Illawarra?
Oak Flats Muffler Men supplies and fits the MKHN0175 in-house across the Illawarra. We set the hotdog and rear muffler on the car's hangers, check clearance to the floor and rear valance, and join each stage square to the pipe. Bring the car in and we'll confirm fitment and book the bay.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- What's the hotdog in the MKHN0175?
- A compact straight-through resonator fitted ahead of the rear muffler to cut drone without restricting flow.
- What bore is it?
- It's 2.5in — the tighter pipe option, holding gas speed up for low-down and mid-range response.
- Does it fit the wagon as well as the sedan?
- It's listed for the HSV VE E2 in both sedan and wagon body. Confirm your exact build with the workshop before ordering.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More mufflers and resonators the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
Holden Commodore VE Ute & Maloo V8 3in Catback Muffler
MPI AutomotiveRRP$3830.49Holden Commodore VE Ute & Maloo V8 3in Catback Muffler/Muffler (SSMKHN0196) Fits HOLDEN. Fast.
View part
Holden Commodore VE V8 Sedan Wagon 3in Catback Muffler
MPI AutomotiveRRP$3830.49Holden Commodore VE V8 Sedan Wagon 3in Catback Muffler/Muffler (SSMKHN0170) Fits HOLDEN. Fast.
View part
HSV VE E2 Sedan Wagon 3in Catback Hotdog/Muffler
MPI AutomotiveRRP$3812.47HSV VE E2 Sedan Wagon 3in Catback Hotdog/Muffler (SKU: SSMKHN0179) Engineered. Quality guaranteed.
View part
VF HSV Ute Maloo V8 3in CatBack Muffler
MPI AutomotiveRRP$3749.44VF HSV Ute Maloo V8 3in CatBack Muffler/Muffler (SSMKHN0337) Fits HOLDEN. Fast shipping, warranty included.
View part
VF HSV V8 Sedan Wagon 3in Catback Muffler
MPI AutomotiveRRP$3749.44VF HSV V8 Sedan Wagon 3in Catback Muffler/Muffler (SKU: SSMKHN0333) Engineered. Quality guaranteed.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.