HSV VE E2 Sedan Wagon 3in Catback Muffler
MPI AutomotiveRRP$4027.11HSV VE E2 Sedan Wagon 3in Catback Muffler/Muffler (SKU: SSMKHN0178) Engineered. Quality guaranteed.
View partMKHN0302
Holden WK WL S/MAN V8 2.5in Dual Catback Muffler
Holden WK WL S/MAN V8 2.5in Dual Catback Muffler/Muffler (SKU: MKHN0302) Engineered. Quality guaranteed.
BrandMantaMPI Automotive
Category: Mufflers and resonators
RRP $1267.92 AUD
In stock at supplierAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- MKHN0302
- Supplier
- MPI Automotive
- Category
- Mufflers and resonators
- Vehicle fitment
- Holden
- Stock status
- In stock at supplier
A chambered muffler on each pipe is what defines the MPI Automotive MKHN0302: a 2.5in dual cat-back for the Holden WK/WL Statesman V8 that runs absorptive mufflers on both sides for the most composed tone in this dual range.
What does running a muffler on each side do?
Both pipes pass through a chambered muffler, so each path is quietened by reflection and absorption rather than left to flow freely. The MKHN0302 has no compact straight-through element anywhere in the run, which is what gives it the most restrained note of the dual builds. It suits a Statesman V8 owner who wants the symmetry of a true twin layout but a measured, civil exhaust note to go with the long-wheelbase cruiser character.
Who is the 2.5in dual sizing for?
It runs two parallel 2.5in pipes rearward from the cat, a bore chosen to keep gas speed up across the twin path on a heavy WK/WL Statesman. The dual layout mirrors flow down both sides of the floor, which matches the V8's twin-outlet character without reaching for the largest pipe on the shelf. The supplier lists the V8 fitment but not exact production years, so we confirm your variant before ordering.
Does it affect road compliance?
As a cat-back, the MKHN0302 sits behind the catalytic converter and leaves the factory emissions hardware untouched. Road compliance then comes down to noise limits and your state's rules, so confirm the exact build and any NSW requirements with the workshop before fitting.
How does fitting work at our Illawarra workshop?
Oak Flats Muffler Men supplies and fits the MKHN0302 in-house across the Illawarra. We hoist the car, line up both 2.5in paths and seat the twin mufflers for clearance under the floor as the system goes up. It's listed to fit the Holden WK/WL Statesman V8 — send your build and we'll confirm fitment and book a bay.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- What makes the MKHN0302 the quieter dual choice?
- It carries a chambered muffler on each side with no straight-through element, so both pipes are absorbed and reflected for the most composed note in the range.
- What bore is this set?
- It's a 2.5in dual cat-back — two 2.5in pipes for the Holden WK/WL Statesman V8.
- Does it keep the catalytic converter?
- Yes. As a cat-back it sits behind the cat, so the factory catalytic converter stays in place.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More mufflers and resonators the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
Holden Commodore VE Ute & Maloo V8 3in Catback Muffler
MPI AutomotiveRRP$3830.49Holden Commodore VE Ute & Maloo V8 3in Catback Muffler/Muffler (SSMKHN0196) Fits HOLDEN. Fast.
View part
Holden Commodore VE V8 Sedan Wagon 3in Catback Muffler
MPI AutomotiveRRP$3830.49Holden Commodore VE V8 Sedan Wagon 3in Catback Muffler/Muffler (SSMKHN0170) Fits HOLDEN. Fast.
View part
HSV VE E2 Sedan Wagon 3in Catback Hotdog/Muffler
MPI AutomotiveRRP$3812.47HSV VE E2 Sedan Wagon 3in Catback Hotdog/Muffler (SKU: SSMKHN0179) Engineered. Quality guaranteed.
View part
VF HSV Ute Maloo V8 3in CatBack Muffler
MPI AutomotiveRRP$3749.44VF HSV Ute Maloo V8 3in CatBack Muffler/Muffler (SSMKHN0337) Fits HOLDEN. Fast shipping, warranty included.
View part
VF HSV V8 Sedan Wagon 3in Catback Muffler
MPI AutomotiveRRP$3749.44VF HSV V8 Sedan Wagon 3in Catback Muffler/Muffler (SKU: SSMKHN0333) Engineered. Quality guaranteed.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.