HSV VE E2 Sedan Wagon 3in Catback Muffler
MPI AutomotiveRRP$4027.11HSV VE E2 Sedan Wagon 3in Catback Muffler/Muffler (SKU: SSMKHN0178) Engineered. Quality guaranteed.
View partMKHN0326
Holden Colorado 7 SUV 2.8L TURBO BACK WITHOUT CAT & WITH CENTRE MUFFLER
Holden Colorado 7 SUV 2.8L TURBO BACK WITHOUT CAT & WITH CENTRE MUFFLER (MKHN0326) Fits HOLDEN. Fast.
BrandMantaMPI Automotive
Category: Mufflers and resonators
RRP $1449.58 AUD
In stock at supplierAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- MKHN0326
- Supplier
- MPI Automotive
- Category
- Mufflers and resonators
- Vehicle fitment
- Holden
- Stock status
- In stock at supplier
The MPI Automotive MKHN0326 is a turbo-back for the Holden Colorado 7 SUV 2.8L that deletes the catalytic converter and silences through a centre muffler. The centre-muffler position is the distinguishing point — silencing in the mid-section rather than at the rear.
Why a centre muffler on this turbo-back?
On the Colorado 7 wagon the MKHN0326 places its muffler in the centre of the system rather than at the tail, which tempers mid-range resonance and floor drone in the body of the SUV. As a turbo-back it replaces the run from the turbo outlet rearward — the full engine-back span on the 2.8L diesel. The centre-mounted silencer shapes the note from the middle of the car, suiting owners who want to address drone through the cabin floor.
Is it road legal in NSW?
No — the MKHN0326 deletes the catalytic converter, so it is not ADR 79/04 compliant for road registration in NSW and is intended for off-road or competition use only. The cat is emissions hardware the Colorado 7 was registered with, and removing it puts the vehicle outside road compliance. Discuss how the wagon will be used with the workshop before committing.
Will it suit my Colorado 7?
It's listed to fit the Holden Colorado 7 SUV 2.8L — the wagon body, which routes differently to the ute. The SUV underbody and the 2.8L diesel both set the run. Confirm your exact build with the workshop before ordering, as feed data can be imperfect.
How do we fit it in Illawarra?
Oak Flats Muffler Men supplies and fits the MKHN0326 in-house across the Illawarra. We confirm the cat-delete suits the use case, check the centre muffler's clearance against the wagon floor, and hang the turbo-back run square. Bring the Colorado 7 in and we'll confirm fitment and book the bay.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- Is the MKHN0326 road legal?
- No — it deletes the catalytic converter, so it is not ADR 79/04 compliant for road registration in NSW and is for off-road use only.
- Where is the muffler?
- It's a centre muffler — mounted mid-system to temper drone through the wagon floor, rather than at the tail.
- Which vehicle does it fit?
- It's listed to fit the Holden Colorado 7 SUV 2.8L. Confirm your exact build with the workshop.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More mufflers and resonators the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
Holden Commodore VE Ute & Maloo V8 3in Catback Muffler
MPI AutomotiveRRP$3830.49Holden Commodore VE Ute & Maloo V8 3in Catback Muffler/Muffler (SSMKHN0196) Fits HOLDEN. Fast.
View part
Holden Commodore VE V8 Sedan Wagon 3in Catback Muffler
MPI AutomotiveRRP$3830.49Holden Commodore VE V8 Sedan Wagon 3in Catback Muffler/Muffler (SSMKHN0170) Fits HOLDEN. Fast.
View part
HSV VE E2 Sedan Wagon 3in Catback Hotdog/Muffler
MPI AutomotiveRRP$3812.47HSV VE E2 Sedan Wagon 3in Catback Hotdog/Muffler (SKU: SSMKHN0179) Engineered. Quality guaranteed.
View part
VF HSV Ute Maloo V8 3in CatBack Muffler
MPI AutomotiveRRP$3749.44VF HSV Ute Maloo V8 3in CatBack Muffler/Muffler (SSMKHN0337) Fits HOLDEN. Fast shipping, warranty included.
View part
VF HSV V8 Sedan Wagon 3in Catback Muffler
MPI AutomotiveRRP$3749.44VF HSV V8 Sedan Wagon 3in Catback Muffler/Muffler (SKU: SSMKHN0333) Engineered. Quality guaranteed.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.