Toyota Landcruiser UZJ200 4.7L V8 Full System 3in Including Extractors
MPI AutomotiveRRP$5467.66MPI Automotive Toyota Landcruiser UZJ200 4.7L V8 Full System 3in Including Extractors, Cats and Catback with Single.
View partMKTY0179
Toyota Landcruiser UZJ200 4.7L V8 Full System 3in Including Extractors & Cat Back
Toyota Landcruiser UZJ200 4.7L V8 Full System 3in Including Extractors & Cat Back with Single 3¼in S.
BrandMantaMPI Automotive
Category: Extractors and headers
RRP $4905.97 AUD
In stock at supplierAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- MKTY0179
- Supplier
- MPI Automotive
- Category
- Extractors and headers
- Vehicle fitment
- Toyota
- Stock status
- In stock at supplier
The MPI Automotive MKTY0179 is a 3in full exhaust system listed to fit the Toyota Landcruiser UZJ200 4.7L V8. It runs from extractors at the heads through to a single 3in cat-back, so it is the engine-back package rather than a tailpipe change.
What does this full system cover?
This is a complete extractor-to-tailpipe package for the 200 Series UZJ200 petrol V8: tuned extractors at each head, then a single 3in run cat-back. On a heavy wagon like the 200, the cast manifolds and factory pipework are the first restriction, so opening the whole path to a single 3in line is about flow through the system rather than any power figure, which we can't quote.
What are extractors and where do they sit?
Extractors (headers) replace the factory cast manifolds with tubular runners off each cylinder that merge downstream, letting each exhaust pulse leave more freely. They sit at the very front of the system, at the heads, and on the MKTY0179 they feed the rest of the 3in pipework. Material isn't published by the supplier, so confirm the pipe specification with the workshop if it matters to your build.
Is it road legal?
This system is described as including the extractors and cat-back, so the catalytic-converter hardware referenced in the listing stays part of the path rather than being deleted. Emissions compliance still depends on your exact vehicle and state requirements, so confirm road compliance for your UZJ200 with the workshop before fitting.
What does fitting involve at our Illawarra workshop?
Oak Flats Muffler Men fits full Landcruiser systems like this in-house across the Illawarra. It's an engine-bay-and-underbody job: the manifolds come off and the extractors go on with fresh gaskets, then the single 3in cat-back is hung and aligned. It's a special-order package — its RRP is $4,905.97. Send your UZJ200 details and we'll confirm clearances and book the bay.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- Will the MKTY0179 fit my Landcruiser?
- It is listed to fit the Toyota Landcruiser UZJ200 with the 4.7L V8. Confirm your exact build with the workshop before ordering.
- Is this the whole system or just extractors?
- The whole system — extractors at the heads plus a single 3in cat-back, not the extractors on their own.
- Does it keep the catalytic converter?
- The listing describes it as including extractors and a cat-back, so the converter hardware stays part of the path. Confirm compliance for your state with the workshop.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
Toyota Landcruiser UZJ100 4.7L V8 Extractors, Cats & 3in Exhaust
MPI AutomotiveRRP$5259.39Toyota Landcruiser UZJ100 4.7L V8 Extractors, Cats & 3in Exhaust with Centre & Rear Muffler.
View part
Toyota UZJ100 LANDCRUISER 4.7L V8 EXTRACTORS, CATS & 3in EXHAUST
MPI AutomotiveRRP$4936.68Toyota UZJ100 LANDCRUISER 4.7L V8 EXTRACTORS, CATS & 3in EXHAUST WITH CENTRE MUFFLER & REAR TAILPIPE (SKU.
View part
Landcruiser URJ202 4.6L V8 2012 On, 3in Full System Inc Extractor, Cats
MPI AutomotiveRRP$4870.49MPI Automotive Landcruiser URJ202 4.6L V8 2012 On, 3in Full System Inc Extractor, Cats, Centre & Rear Muffler.
View part
Toyota Landcruiser UZJ100 4.7L V8 Extractors, Cats & 3in Exhaust
MPI AutomotiveRRP$4582.89Toyota Landcruiser UZJ100 4.7L V8 Extractors, Cats & 3in Exhaust with Centre & Rear Muffler.
View part
Toyota UZJ100 LANDCRUISER 4.7L V8 EXTRACTORS, CATS & 3in EXHAUST
MPI AutomotiveRRP$4414.77Toyota UZJ100 LANDCRUISER 4.7L V8 EXTRACTORS, CATS & 3in EXHAUST WITH CENTRE MUFFLER & REAR TAILPIPE (SKU.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.