RCA449 Upper Control ARM for Ford Everest Next Generation UB 2LTR BI
RAW 4x4RRP$1012.15RAW 4x4 RCA449 Upper Control ARM.
View partNM1408-2566
NM1408 2566 Shock Absorber for Ford Everest Next Generation UB 3LTR V6 Diesel
NM1408 2566 Shock Absorber.
BrandRAW 4x4
Category: Suspension and 4x4 parts
RRP pending
Confirmed on orderAfterpay, Zip Pay & Zip Money available
Part specs
- heights
- ['40 - 75mm', '40-75mm']
- positions
- ['Front']
- shock_types
- ['nitromax']
- vehicle_count
- 3
The RAW 4x4 NM1408-2566 is a replacement shock absorber listed to fit the Next-Generation Ford Everest (UB platform) with the 3.0L V6 turbo-diesel. A shock absorber damps spring movement — turning the bounce after a bump into heat so the vehicle settles instead of pogoing — and this is the direct-replacement damper for the listed application.
What does a shock absorber actually do?
Springs carry the load; the shock absorber controls how they move. Without damping, every bump would leave the suspension oscillating, so the shock converts that motion into heat and keeps the tyre planted. The NM1408-2566 is a straight replacement for a worn or standard damper on the listed vehicle. The supplier publishes no stroke, valving or damping figures in this listing, and we won't quote any.
Will it suit Next-Gen Ford Everest UB (3.0L V6 turbo-diesel)?
It's listed to fit the Next-Generation Ford Everest (UB platform) with the 3.0L V6 turbo-diesel. Shock fitment hinges on the body, ride height and mounting of your exact build, so we check the NM1408-2566 against the listing and the vehicle before ordering rather than relying on the model name.
Is there any compliance to worry about?
A shock absorber is a damping component, not an emissions part, so it sits outside catalytic-converter and muffler compliance. If the damper forms part of a ride-height change, any engineering or NSW requirements come from the overall build — we'll go through that with you. RAW 4x4 publishes no approval here and we won't imply one.
What does fitting involve at our Illawarra workshop?
Oak Flats Muffler Men fits replacement shock absorbers in-house across the Illawarra. We match the RAW 4x4 listing to your build, check the mounting points and clearances on the vehicle, and quote the labour once we've seen it. It's listed to fit the Next-Generation Ford Everest (UB platform) with the 3.0L V6 turbo-diesel; confirm your exact build with the workshop before ordering.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- Does the NM1408-2566 fit my Next-Gen Ford Everest UB (3.0L V6 turbo-diesel)?
- It's listed to fit the Next-Generation Ford Everest (UB platform) with the 3.0L V6 turbo-diesel. We confirm the body, ride height and mounting against the listing at the workshop before ordering.
- Should shocks be done in pairs?
- Usually yes — matched dampers across an axle keep the vehicle even. We'll advise what your Next-Gen Ford Everest UB (3.0L V6 turbo-diesel) needs once we've seen it.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More suspension and 4x4 parts the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
RCA351 Upper Control ARM for Ford Everest UA Wagon
RAW 4x4RRP$969.08RAW 4x4 RCA351 Upper Control ARM.
View part
RC 2482 Coil Spring for Ford Everest UA Wagon
RAW 4x4RRP$436.13RC 2482 Coil Spring. Fast shipping, warranty included.
View part
RL893 Leaf Spring for Ford Courier Pc, Pd, Pe, 4WD UTE / Dual CAB
RAW 4x4RRP$399.65RL893 Leaf Spring. Quality guaranteed.
View part
RL895 Leaf Spring for Ford Ranger Pj, PK UTE / Dual CAB (duratorq)
RAW 4x4RRP$399.65RL895 Leaf Spring.
View part
RC 2481 Coil Spring for Ford Everest UA Wagon
RAW 4x4RRP$361.02RC 2481 Coil Spring. Quality guaranteed.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.