NM503M2

NM503M2 Shock Absorber Nitro for Ford F Series F250 50MM Lift UTE / TRAYBACK4 Shocks PER

NM503M2 Shock Absorber Nitro.

BrandRAW 4x4

Category: Suspension and 4x4 parts

RRP $238.00 AUD
Confirmed on order
Afterpay, Zip Pay & Zip Money available
Afterpay acceptedZip accepted — Zip Pay and Zip Money
NM503M2 Shock Absorber Nitro for Ford F Series F250 50MM Lift UTE / TRAYBACK4 Shocks PER Rear Axle product image

Part specs

heights
['0-50mm']
positions
['Rear']
shock_types
['nitromax']
vehicle_count
1

Set up for a 50mm lift, the RAW 4x4 NM503M2 is a nitro-gas shock absorber listed for the Ford F-Series F250 ute (trayback). It is supplied four shocks per rear axle, suiting the twin-shock-per-side rear these heavy trays run.

What does the 50mm lift figure mean here?

The NM503M2 is listed for a 50mm lift, so it is valved and lengthened to work with a raised F250 rather than a standard-height one. Fitting lift-specific shocks matters because a damper sized for the stock ride height can run out of travel once the body sits higher. This is the part to pair with a 50mm raised rear.

Why a nitro-gas shock?

Nitro shocks use a nitrogen gas charge to resist the foaming that can fade a hard-worked damper, which is useful on a heavy hauler like the F250 that carries a tray and load. The four-per-rear-axle count reflects the dual-shock arrangement on each side at the back, so the listing keeps a full matched set together.

Which F250 is it listed for?

It is listed to fit the Ford F-Series F250 ute in trayback form at a 50mm lift. The F250 is a heavy-duty platform and the rear works hard, so matched, lift-correct shocks keep both sides behaving the same. Confirm your exact F250 build and lift height with the workshop before ordering.

What does fitting involve in the Illawarra?

Oak Flats Muffler Men fits RAW 4x4 suspension in-house. We’ll confirm the NM503M2 matches your F250 and its 50mm lift, fit the rear shocks as a matched set, and check mounts and bushes while we’re under there. Book the bay and we’ll sort it.

Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.

Common questions

Is the NM503M2 for a lifted F250?
Yes — it is listed for a 50mm lift on the Ford F250 ute trayback, so it suits a raised rear rather than standard height.
How many shocks does the listing cover?
Four shocks per rear axle, matching the dual-shock-per-side rear on these heavy trays.
What is a nitro-gas shock?
A nitrogen-charged damper that resists fade under sustained heavy work. We can fit it and check the rest of the rear while the vehicle is in.

Fitment support across the Illawarra

Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.
Show nearby fitment areasCollapse section

Book the right exhaust job without guessing.

Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.