NM654M1

NM654M1 Shock Absorber Nitro for Nissan Navara D40 ALL Excluding STX550 Ute/dual CAB

NM654M1 Shock Absorber Nitro.

BrandRAW 4x4

Category: Suspension and 4x4 parts

RRP pending
Confirmed on order
Afterpay, Zip Pay & Zip Money available
Afterpay acceptedZip accepted — Zip Pay and Zip Money
NM654M1 Shock Absorber Nitro for Nissan Navara D40 ALL Excluding STX550 Ute/dual CAB (all Variants with Abs) product image

Part specs

heights
['50mm']
positions
['Rear']
shock_types
['nitromax']
vehicle_count
2

The RAW 4x4 NM654M1 is a Nitro-series shock absorber for the Nissan Navara D40 dual-cab ute, covering all ABS-equipped variants except the STX550. It's a damper-only replacement aimed at restoring control to a D40 whose original shocks have worn out.

What does this damper actually do?

Where a spring carries the load, the NM654M1 controls the movement around it — slowing rebound after a hit and keeping the tyre on the road so the Navara doesn't wallow or bounce. It's the part to fit when a D40 feels floaty over corrugations or no longer settles after a speed hump. As a Nitro-series shock it's a straight replacement for the worn factory unit, working with whatever spring the ute already runs rather than altering ride height.

Does it fit my D40?

It's listed to fit the Nissan Navara D40 dual-cab ute, all variants with ABS, with the STX550 specifically excluded — that model runs its own damper. The supplier doesn't publish the year span or whether this is the front or rear unit, so confirm your variant and the position you need with the workshop before ordering.

Why replace shocks in pairs?

A worn shock fades gradually, so the opposite side is usually tired too. Oak Flats Muffler Men fits Nitro dampers like the NM654M1 across the Illawarra and replaces them in axle pairs so the D40 sits and reacts evenly; we inspect the bushes and mounts at the same time, and verify the truck isn't an STX550.

How do we price and order it?

RAW 4x4 hasn't published a fixed price for the NM654M1, so we treat it as a quote-on-order item: tell us your D40 variant and which corner you need and we'll confirm availability and cost before the part comes in. That keeps you from ordering the wrong damper for an STX550-excluded listing.

Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.

Common questions

Is the NM654M1 a lift kit?
No. It's a replacement shock absorber. It restores damping but doesn't raise the Navara; ride height comes from the springs.
Can you fit it at Oak Flats?
Yes. We fit it in-house in Oak Flats and check the matching side, bushes and mounts while we're under the truck.

Fitment support across the Illawarra

Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.
Show nearby fitment areasCollapse section

Book the right exhaust job without guessing.

Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.