NM898-2298

NM898 2298 Shock Absorber Nitro for Ford Ranger PX I & II (t6) UTE / Dual CAB

NM898 2298 Shock Absorber Nitro.

BrandRAW 4x4

Category: Suspension and 4x4 parts

RRP pending
Confirmed on order
Afterpay, Zip Pay & Zip Money available
Afterpay acceptedZip accepted — Zip Pay and Zip Money
NM898 2298 Shock Absorber Nitro for Ford Ranger PX I & II (t6) UTE / Dual CAB product image

Part specs

heights
['40mm']
positions
['Front']
shock_types
['nitromax']
vehicle_count
2

The RAW 4x4 NM898-2298 is a Nitro-series gas shock absorber listed for the Ford Ranger PX I and II (T6) ute and dual-cab, charged with nitrogen for consistent damping on rough roads.

What nitrogen charging does for a 4x4 shock

The NM898-2298 keeps its damping oil under a nitrogen charge, which holds off the foaming that fades control on long corrugations. On a PX Ranger doing real work that means body movement stays controlled when the ute is loaded or covering rough country.

The shock's role on the PX platform

A damper controls how the spring compresses and rebounds rather than carrying the load. The NM898-2298 is listed for a particular position on the PX Ranger and works with the factory springs there; because the ute runs different setups front to rear, we confirm the right end for your build.

Does the NM898-2298 suit my PX Ranger?

It's listed to fit the Ford Ranger PX I and II (T6) in ute and dual-cab form — the generation that shared its platform with Mazda. The PX I and PX II run the same basic chassis, so a damper listed across both covers a long production span. Send your exact model and we'll confirm the NM898-2298 is right for the end of the car you're doing and whether you need a pair or a full set.

Fitting at our Illawarra workshop

Oak Flats Muffler Men replaces 4x4 shocks in-house across the Illawarra. Worn dampers are easy to overlook, so we inspect the mounts, bushes and the old shocks together before fitting the NM898-2298, then settle the suspension so the PX Ranger tracks straight before you drive away.

Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.

Common questions

Does the NM898-2298 fit my PX Ranger?
It's listed for the Ford Ranger PX I and II (T6) ute and dual-cab. Confirm your exact model and which axle you need with the workshop first.
What does the nitrogen charge do?
It keeps the damper oil under pressure so it resists foaming and fade on long corrugations. RAW 4x4 supplies it; Oak Flats Muffler Men fits it.
One shock or a set?
That depends on which end you're doing and your setup. We confirm the quantity when you bring the vehicle in.

Fitment support across the Illawarra

Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.
Show nearby fitment areasCollapse section

Book the right exhaust job without guessing.

Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.