NM898-2410

NM898 2410 Shock Absorber Nitro for Ford Ranger PX I & II (t6) UTE / Dual CAB

NM898 2410 Shock Absorber Nitro.

BrandRAW 4x4

Category: Suspension and 4x4 parts

RRP pending
Confirmed on order
Afterpay, Zip Pay & Zip Money available
Afterpay acceptedZip accepted — Zip Pay and Zip Money
NM898 2410 Shock Absorber Nitro for Ford Ranger PX I & II (t6) UTE / Dual CAB product image

Part specs

heights
['40mm']
positions
['Front']
shock_types
['nitromax']
vehicle_count
2

Within the NM898 family for the T6 Ranger, the RAW 4x4 NM898-2410 is the variant carrying the -2410 suffix — a single Nitro nitrogen-charged damper matched to a specific position on the PX I and II ute.

What the -2410 suffix tells you

RAW 4x4 catalogues the NM898 across several application-specific dampers, and the suffix is how you tell them apart. The NM898-2410 is the unit for its particular corner or build on the PX Ranger; using the right suffix is the difference between a shock that bolts up correctly and one that doesn't. It's a damper, so it manages movement rather than ride height.

Is it road legal to fit?

A shock absorber is a suspension wear part, not exhaust or emissions equipment, so the road-legality rules that govern exhausts don't apply to a like-for-like replacement. If the NM898-2410 is going in as part of a lift, the wider NSW modification rules can apply — we'll explain where you stand for your setup.

Does it fit my PX Ranger dual cab?

It's listed to fit the Ford Ranger PX I and PX II (T6) ute dual cab, the platform shared with the Mazda BT-50 of that era. Send us your build and the corner you're replacing and we'll confirm the NM898-2410 is the correct variant before we order it in.

Fitting at our Illawarra workshop

Oak Flats Muffler Men fits shock absorbers in-house across the Illawarra. We swap dampers in matched axle pairs, inspect the mounts and bushes while the corner is apart, and check the ride afterwards. Pricing on this line is confirmed on request, as it can be special-order.

Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.

Common questions

How is the NM898-2410 different from other NM898 shocks?
The suffix identifies the application. The -2410 is for a specific position or build on the PX Ranger; confirm yours with the workshop before ordering.
Are any performance numbers published?
No. RAW 4x4 lists it as a nitrogen-charged Nitro damper with no length, valving or sound figures, so we don't quote any.
Do shocks get fitted in pairs?
Yes — we renew dampers in axle pairs so both sides behave the same and the truck stays balanced.

Fitment support across the Illawarra

Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.
Show nearby fitment areasCollapse section

Book the right exhaust job without guessing.

Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.