Ford Mustang Coupe 2015 to 2017 5.0L Headers, Cats And Twin 3"Inch
PacemakerRRP$4866.88Pacemaker Ford Mustang Coupe 2015 to 2017 5.0L Headers, Cats And Twin 3"Inch System LH Drive Only.
View partPH4020L_R
PH 4020 Falcon XR-XY 289-302 Windsor with Standard Heads
PH 4020 Falcon XR-XY 289-302 Windsor with Standard Heads.
BrandPacemaker
Category: Extractors and headers
RRP $1066.85 AUD
Confirmed on orderAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- PH4020L_R
- Supplier
- Pacemaker
- Category
- Extractors and headers
- Vehicle fitment
- Ford XA XB XC
- Stock status
- Confirmed on order
The Pacemaker PH4020L_R is a matched left/right extractor set listed to fit the Ford Falcon XR–XY running the 289 or 302 Windsor V8 with standard heads. It replaces the cast factory manifolds on the classic small-block.
What are these extractors and what do they change?
Extractors, or headers, bolt to the cylinder heads in place of the original cast exhaust manifolds. This set is cut for the 289 and 302 Windsor with standard heads — the head casting matters because port and bolt patterns differ, which is why the listing calls it out. On an early XR–XY Falcon they're the starting point of an exhaust build, ahead of whatever pipework and muffler follow. We publish no flow, power or sound figures and won't fabricate any.
Will it suit my Ford Falcon?
It's listed to fit the XR through XY Falcon with the 289 or 302 Windsor and standard heads. If your engine runs aftermarket or non-standard heads, that changes the fit, so confirm your exact combination with the workshop against the listing before ordering. The L_R suffix means a matched left and right pair.
Is it road legal?
These are extractors rather than a catalytic converter or muffler, so they carry no emissions approval of their own. Whether the finished exhaust suits NSW road requirements depends on the rest of the system and how it's engineered on a vehicle of this era. No compliance approval is published by the supplier, and we won't claim one.
What does fitting involve at our Illawarra workshop?
Oak Flats Muffler Men fits classic Falcon extractors like the PH4020L_R in the Illawarra. On an older car we check head type, steering and chassis clearance, fit fresh gaskets and seal the joints before tying into the system behind. We confirm the listing matches your Windsor build first. RRP is listed at 1066.85 AUD; fitting is quoted once we've seen the car.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- Does the PH4020L_R suit non-standard heads?
- It's listed specifically for the 289/302 Windsor with standard heads. If yours run aftermarket heads, confirm the fit with the workshop before ordering.
- Is it a left and right pair?
- Yes — the L_R designation means a matched left and right extractor set for the XR–XY Falcon.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
Ford Mustang Convertible 2015 Onward 5.0L Headers, Cats And Twin 3"Inch
PacemakerRRP$4866.88Ford Mustang Convertible 2015 Onward 5.0L Headers, Cats And Twin 3"Inch System LH Drive Only (SKU: PP4175-52), $4866.88 from Pacemaker. Engineered
View part
Ford Mustang Coupe 2015 to 2017 5.0L Headers, Cats And Twin 3"Inch
PacemakerRRP$4855.20Ford Mustang Coupe 2015 to 2017 5.0L Headers, Cats And Twin 3"Inch System RH Drive Only.
View part
Ford Mustang Convertible 2015 to 2017 5.0L Headers, Cats And Twin 3"Inch
PacemakerRRP$4855.20Ford Mustang Convertible 2015 to 2017 5.0L Headers, Cats And Twin 3"Inch System RH Drive Only (SKU: PP4178-54), $4855.20 from Pacemaker. Engineered
View part
Ford Mustang Coupe 2015 to 2017 5.0L Headers, Cats And Twin 2 1/2 Inch
PacemakerRRP$4753.74Pacemaker Ford Mustang Coupe 2015 to 2017 5.0L Headers, Cats And Twin 2 1/2 Inch System to Suit RH Drive Only.
View part
Ford Mustang Convertible 2015 to 2017 5.0L Headers, Cats And Twin 2 1/2
PacemakerRRP$4753.74Ford Mustang Convertible 2015 to 2017 5.0L Headers, Cats And Twin 2 1/2 Inch System To Suit RH Drive Only.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.