Ford Mustang Coupe 2015 to 2017 5.0L Headers, Cats And Twin 3"Inch
PacemakerRRP$4866.88Pacemaker Ford Mustang Coupe 2015 to 2017 5.0L Headers, Cats And Twin 3"Inch System LH Drive Only.
View partPH4050L_R
PH 4050 Falcon XR-XF 2V Cleveland 302-351 Tri-Y
PH 4050 Falcon XR-XF 2V Cleveland 302-351 Tri-Y (PH4050L_R) at $1068.68 RRP from Pacemaker. Fast shipping, warranty included.
BrandPacemaker
Category: Extractors and headers
RRP $1068.68 AUD
Confirmed on orderAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- PH4050L_R
- Supplier
- Pacemaker
- Category
- Extractors and headers
- Vehicle fitment
- Ford XA XB XC
- Stock status
- Confirmed on order
The Pacemaker PH4050L_R is a tri-Y extractor set listed to fit the Ford Falcon XR–XF running the 2V Cleveland 302 or 351 V8. It replaces the cast factory manifolds on the Cleveland-headed engine.
What is a tri-Y extractor and what does it change?
Extractors, or headers, bolt to the cylinder heads in place of the cast factory manifolds. A tri-Y design pairs the primary pipes in stages before they merge, a layout used on V8s to tune scavenging across the rev range rather than chase one peak. This set is cut for the 2V Cleveland heads on the 302 and 351 — the 2V head designation matters because Cleveland port shapes differ between heads. We publish no flow, power or sound figures and won't invent any.
Will it suit my Ford Falcon?
It's listed to fit the XR through XF Falcon with the 2V Cleveland 302 or 351. The head type is the key variable, so if you're unsure whether yours are 2V Cleveland, confirm with the workshop against the listing before ordering. The L_R suffix means a matched left and right pair.
Is it road legal?
These are extractors rather than a catalytic converter or muffler, so they carry no emissions approval of their own. Whether the finished exhaust suits NSW road requirements depends on the rest of the system and how it's engineered on a classic car. No compliance approval is published by the supplier, and we won't claim one.
What does fitting involve at our Illawarra workshop?
Oak Flats Muffler Men fits classic Falcon extractors like the PH4050L_R in the Illawarra. On a Cleveland car we confirm the head type, check steering and chassis clearance, fit fresh gaskets and seal the joints before building the system behind. We match the listing to your engine first. RRP is listed at 1068.68 AUD; fitting is quoted once we've seen the car.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- Does the PH4050L_R suit 4V Cleveland heads?
- No — this set is cut for 2V Cleveland heads. The 4V Cleveland uses a separate part number; confirm your heads with the workshop.
- Is it a left and right pair?
- Yes — the L_R designation is a matched left and right extractor set for the XR–XF Falcon.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
Ford Mustang Convertible 2015 Onward 5.0L Headers, Cats And Twin 3"Inch
PacemakerRRP$4866.88Ford Mustang Convertible 2015 Onward 5.0L Headers, Cats And Twin 3"Inch System LH Drive Only (SKU: PP4175-52), $4866.88 from Pacemaker. Engineered
View part
Ford Mustang Coupe 2015 to 2017 5.0L Headers, Cats And Twin 3"Inch
PacemakerRRP$4855.20Ford Mustang Coupe 2015 to 2017 5.0L Headers, Cats And Twin 3"Inch System RH Drive Only.
View part
Ford Mustang Convertible 2015 to 2017 5.0L Headers, Cats And Twin 3"Inch
PacemakerRRP$4855.20Ford Mustang Convertible 2015 to 2017 5.0L Headers, Cats And Twin 3"Inch System RH Drive Only (SKU: PP4178-54), $4855.20 from Pacemaker. Engineered
View part
Ford Mustang Coupe 2015 to 2017 5.0L Headers, Cats And Twin 2 1/2 Inch
PacemakerRRP$4753.74Pacemaker Ford Mustang Coupe 2015 to 2017 5.0L Headers, Cats And Twin 2 1/2 Inch System to Suit RH Drive Only.
View part
Ford Mustang Convertible 2015 to 2017 5.0L Headers, Cats And Twin 2 1/2
PacemakerRRP$4753.74Ford Mustang Convertible 2015 to 2017 5.0L Headers, Cats And Twin 2 1/2 Inch System To Suit RH Drive Only.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.