Ford Mustang Coupe 2015 to 2017 5.0L Headers, Cats And Twin 3"Inch
PacemakerRRP$4866.88Pacemaker Ford Mustang Coupe 2015 to 2017 5.0L Headers, Cats And Twin 3"Inch System LH Drive Only.
View partPH4182-1_L_R
PH 4182 Ford Mustang (6th Generation) 2015 to 2018 (Right Hand Drive Only) V8 5.0L
Pacemaker PH 4182 Ford Mustang (6th Generation) 2015 to 2018 (Right Hand Drive Only) V8 5.0L Coyote.
BrandPacemaker
Category: Extractors and headers
RRP $1392.93 AUD
Confirmed on orderAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- PH4182-1_L_R
- Supplier
- Pacemaker
- Category
- Extractors and headers
- Vehicle fitment
- Ford 6th Generation
- Stock status
- Confirmed on order
The Pacemaker PH4182-1_L_R is a left- and right-hand pair of extractors listed to fit the Ford Mustang V8 5.0L Coyote, sixth-generation, 2015 to 2018, right-hand-drive only. It's the headers stage of an exhaust upgrade rather than a cat-back or muffler change.
What are extractors and what do they change?
Extractors — also called headers — replace the cast factory exhaust manifolds with separate tuned-length primary tubes for each cylinder before they merge. The idea is to give each exhaust pulse a clearer path off the head than a one-piece cast manifold allows. This PH4182-1_L_R is supplied as a left and right pair for the V8, so it covers both banks of the Coyote engine. It changes the exhaust note and the way the engine breathes at the manifold; we publish no power, flow or sound figures and won't quote any.
Will it suit my Ford Mustang?
It's listed to fit the sixth-generation Ford Mustang V8 5.0L Coyote, 2015 to 2018, and specifically the right-hand-drive car — the listing calls that out, which matters because steering and bay packaging differ between left- and right-hand-drive. Confirm your exact build year and that yours is the right-hand-drive Coyote V8 with the workshop before ordering.
Is it road legal?
Extractors sit ahead of the catalytic converters, so changing them can affect emissions compliance. No road-compliance approval is published by Pacemaker for this part and we won't claim one. Whether a set suits a registered Mustang in NSW depends on the rest of the system and the state's requirements, which we'll work through with you before fitting.
What does fitting involve at our Illawarra workshop?
Oak Flats Muffler Men fits Mustang extractors in-house across the Illawarra. We confirm the part against your right-hand-drive Coyote V8, check clearances around the steering and subframe, fit fresh gaskets and seal the joints. RRP is listed at 1392.93 AUD; fitting is quoted once we've seen the car.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- Does the PH4182-1_L_R fit a left-hand-drive Mustang?
- No — this set is listed for the right-hand-drive Mustang V8 5.0L Coyote (2015–2018) only. Confirm your car's configuration with the workshop before ordering.
- Is it a full exhaust?
- No. It's a pair of extractors that replace the factory manifolds. The rest of the system stays as-is unless you're changing it separately. We'll advise on the whole run when you bring the car in.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
Ford Mustang Convertible 2015 Onward 5.0L Headers, Cats And Twin 3"Inch
PacemakerRRP$4866.88Ford Mustang Convertible 2015 Onward 5.0L Headers, Cats And Twin 3"Inch System LH Drive Only (SKU: PP4175-52), $4866.88 from Pacemaker. Engineered
View part
Ford Mustang Coupe 2015 to 2017 5.0L Headers, Cats And Twin 3"Inch
PacemakerRRP$4855.20Ford Mustang Coupe 2015 to 2017 5.0L Headers, Cats And Twin 3"Inch System RH Drive Only.
View part
Ford Mustang Convertible 2015 to 2017 5.0L Headers, Cats And Twin 3"Inch
PacemakerRRP$4855.20Ford Mustang Convertible 2015 to 2017 5.0L Headers, Cats And Twin 3"Inch System RH Drive Only (SKU: PP4178-54), $4855.20 from Pacemaker. Engineered
View part
Ford Mustang Coupe 2015 to 2017 5.0L Headers, Cats And Twin 2 1/2 Inch
PacemakerRRP$4753.74Pacemaker Ford Mustang Coupe 2015 to 2017 5.0L Headers, Cats And Twin 2 1/2 Inch System to Suit RH Drive Only.
View part
Ford Mustang Convertible 2015 to 2017 5.0L Headers, Cats And Twin 2 1/2
PacemakerRRP$4753.74Ford Mustang Convertible 2015 to 2017 5.0L Headers, Cats And Twin 2 1/2 Inch System To Suit RH Drive Only.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.