Ford Mustang Coupe 2015 to 2017 5.0L Headers, Cats And Twin 3"Inch
PacemakerRRP$4866.88Pacemaker Ford Mustang Coupe 2015 to 2017 5.0L Headers, Cats And Twin 3"Inch System LH Drive Only.
View partPH4182-2_L_R
PH 4182 Ford Mustang (6th Generation) 2018 to 2023 (Right Hand Drive Only) V8 5.0L
PH 4182 Ford Mustang (6th Generation) 2018 to 2023 (Right Hand Drive Only) V8 5.0L Coyote.
BrandPacemaker
Category: Extractors and headers
RRP $1392.93 AUD
Confirmed on orderAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- PH4182-2_L_R
- Supplier
- Pacemaker
- Category
- Extractors and headers
- Vehicle fitment
- Ford 6th Generation
- Stock status
- Confirmed on order
The Pacemaker PH4182-2 is a left-and-right header set listed to fit the Ford Mustang (6th generation, 2018-2023) with the 5.0L Coyote V8, right-hand-drive only. It replaces the factory manifolds at the front of the exhaust.
What does this header set cover?
PH4182-2 is the L/R header pair for the 6th-generation Mustang — the section that bolts to the Coyote V8's heads and gathers the exhaust gas from each bank. Supplied as a matched left and right, it covers the manifold replacement only; the cats, pipework and rear of the exhaust are separate. The listing specifies right-hand-drive fitment for the 2018 to 2023 Mustang.
What are headers and what do they change?
Headers, or extractors, swap the cast factory manifolds for tubular primaries — one tube per cylinder feeding a collector. The general trade-off is a freer-flowing gas path against a more involved fit and a different note than stock. On the 5.0L Coyote V8 the manifolds are a common starting point for exhaust work. We hold no power or sound data for this set, and the supplier hasn't published a primary tube size, so we describe it plainly as the 6th-generation RHD header pair — a character change, not a measured one.
Will it suit my Ford Mustang?
It's listed to fit the 6th-generation Ford Mustang with the 5.0L Coyote V8 from 2018 to 2023, right-hand-drive only. Fitment listings can be imperfect, so confirm your exact variant and that your car is the RHD configuration with the workshop before ordering. Recommended retail is $1,392.93 for the pair.
What does fitting involve at our Illawarra workshop?
Oak Flats Muffler Men supplies and fits header sets like the PH4182-2 in-house across the Illawarra. Headers on the Mustang are an engine-bay job, so we check the primary-tube clearances around the heads and steering before final torque, and confirm how they suit the rest of your exhaust. Send your Mustang's build and we'll book it in.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- Is the PH4182-2 a full exhaust?
- No — it's the header pair only, replacing the factory manifolds. The cats and system behind them are a separate purchase.
- Does it fit left-hand-drive Mustangs?
- The listing specifies right-hand-drive only for the 6th-generation Mustang. Confirm your car's configuration with the workshop before ordering.
- Will it fit my 2018-2023 Mustang?
- It's listed to fit the 6th-generation Mustang 5.0L Coyote V8 from 2018 to 2023, RHD only. Confirm your exact variant with the workshop.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
Ford Mustang Convertible 2015 Onward 5.0L Headers, Cats And Twin 3"Inch
PacemakerRRP$4866.88Ford Mustang Convertible 2015 Onward 5.0L Headers, Cats And Twin 3"Inch System LH Drive Only (SKU: PP4175-52), $4866.88 from Pacemaker. Engineered
View part
Ford Mustang Coupe 2015 to 2017 5.0L Headers, Cats And Twin 3"Inch
PacemakerRRP$4855.20Ford Mustang Coupe 2015 to 2017 5.0L Headers, Cats And Twin 3"Inch System RH Drive Only.
View part
Ford Mustang Convertible 2015 to 2017 5.0L Headers, Cats And Twin 3"Inch
PacemakerRRP$4855.20Ford Mustang Convertible 2015 to 2017 5.0L Headers, Cats And Twin 3"Inch System RH Drive Only (SKU: PP4178-54), $4855.20 from Pacemaker. Engineered
View part
Ford Mustang Coupe 2015 to 2017 5.0L Headers, Cats And Twin 2 1/2 Inch
PacemakerRRP$4753.74Pacemaker Ford Mustang Coupe 2015 to 2017 5.0L Headers, Cats And Twin 2 1/2 Inch System to Suit RH Drive Only.
View part
Ford Mustang Convertible 2015 to 2017 5.0L Headers, Cats And Twin 2 1/2
PacemakerRRP$4753.74Ford Mustang Convertible 2015 to 2017 5.0L Headers, Cats And Twin 2 1/2 Inch System To Suit RH Drive Only.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.