Ford Mustang Coupe 2015 to 2017 5.0L Headers, Cats And Twin 3"Inch
PacemakerRRP$4866.88Pacemaker Ford Mustang Coupe 2015 to 2017 5.0L Headers, Cats And Twin 3"Inch System LH Drive Only.
View partPH4440_Kit
PH 4440 200-221 XR-XW Falcon
Pacemaker PH 4440 200-221 XR-XW Falcon.
BrandPacemaker
Category: Extractors and headers
RRP $704.54 AUD
Confirmed on orderAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- PH4440_Kit
- Supplier
- Pacemaker
- Category
- Extractors and headers
- Vehicle fitment
- Ford XR XT XW
- Stock status
- Confirmed on order
The Pacemaker PH4440_KIT is an extractor kit listed to fit the Ford Falcon XR and XW (listed under the 200/221 designation). It's the headers stage of an exhaust upgrade for these early Falcons.
What are extractors and what do they change?
Extractors, or headers, replace the cast factory exhaust manifold with separate tuned-length tubes for each cylinder before they merge into a collector. On the XR and XW Falcon the aim is a clearer path off the head than a one-piece casting allows, which tends to bring a fuller exhaust note with it. The PH4440_KIT is the manifold-end change, the front of an exhaust upgrade rather than a rear-section swap. We publish no power, flow or sound figures and won't quote any.
Will it suit my Ford Falcon XR or XW?
It's listed to fit the Ford Falcon XR and XW under the 200/221 designation. These are older Falcons, so the body, engine bay and steering layout dictate the fit and confirmation matters more than on a current model. Confirm your exact build with the workshop before ordering — we check the listing against your car first.
Is it road legal?
This is an extractor kit for early Falcons, fitted at the manifold end of the system. No road-compliance approval is published by Pacemaker and we won't claim one. What a registered XR or XW needs in NSW depends on the rest of the system and the requirements that apply to a vehicle of that era, which we'll go through with you before fitting.
What does fitting involve at our Illawarra workshop?
Oak Flats Muffler Men fits Falcon extractors in the Illawarra. On an older car like the XR or XW we confirm the kit against your build, check the headers clear the steering and chassis, fit fresh gaskets and seal the joints. RRP is listed at 704.54 AUD; fitting is quoted once we've seen the car.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- Which Falcons does the PH4440_KIT suit?
- It's listed for the Ford Falcon XR and XW under the 200/221 designation. Confirm your exact build with the workshop before ordering.
- Is this a full exhaust or just the headers?
- It's the extractor (headers) kit — the manifold-end change, not a complete rear-section system. Talk to the workshop about the rest of the run.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
Ford Mustang Convertible 2015 Onward 5.0L Headers, Cats And Twin 3"Inch
PacemakerRRP$4866.88Ford Mustang Convertible 2015 Onward 5.0L Headers, Cats And Twin 3"Inch System LH Drive Only (SKU: PP4175-52), $4866.88 from Pacemaker. Engineered
View part
Ford Mustang Coupe 2015 to 2017 5.0L Headers, Cats And Twin 3"Inch
PacemakerRRP$4855.20Ford Mustang Coupe 2015 to 2017 5.0L Headers, Cats And Twin 3"Inch System RH Drive Only.
View part
Ford Mustang Convertible 2015 to 2017 5.0L Headers, Cats And Twin 3"Inch
PacemakerRRP$4855.20Ford Mustang Convertible 2015 to 2017 5.0L Headers, Cats And Twin 3"Inch System RH Drive Only (SKU: PP4178-54), $4855.20 from Pacemaker. Engineered
View part
Ford Mustang Coupe 2015 to 2017 5.0L Headers, Cats And Twin 2 1/2 Inch
PacemakerRRP$4753.74Pacemaker Ford Mustang Coupe 2015 to 2017 5.0L Headers, Cats And Twin 2 1/2 Inch System to Suit RH Drive Only.
View part
Ford Mustang Convertible 2015 to 2017 5.0L Headers, Cats And Twin 2 1/2
PacemakerRRP$4753.74Ford Mustang Convertible 2015 to 2017 5.0L Headers, Cats And Twin 2 1/2 Inch System To Suit RH Drive Only.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.