Holden VU and VY 6 Cylinder Ute
PacemakerRRP$3800.30Holden VU and VY 6 Cylinder Ute.
View partPP5381-06
Holden Statesman WM Series I And Series II Aug 2006 - Jun 2013 Gen IV 6.0 V8 Cat Back 2
Pacemaker Holden Statesman WM Series I And Series II Aug 2006 - Jun 2013 Gen IV 6.0 V8 Cat Back 2 1/2" Sedan System.
BrandPacemaker
Category: Complete exhaust systems
RRP $2537.89 AUD
Confirmed on orderAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- PP5381-06
- Supplier
- Pacemaker
- Category
- Complete exhaust systems
- Vehicle fitment
- Holden WM
- Stock status
- Confirmed on order
Built for the long-wheelbase Holden Statesman, the Pacemaker PP5381-06 is a 2in cat-back for the WM Series I and II Gen IV 6.0 V8 sedan, listed from 2006. The WM is the stretched body, so its rear pipework runs a different length to a standard Commodore.
Why does the WM Statesman get its own listing?
The Statesman WM is the long-wheelbase version of the platform, so the underfloor run to the tailpipe is longer than the standard-wheelbase cars. That's why the PP5381-06 is a distinct part number rather than a Commodore interchange. It's listed at 2in and covers the WM Series I and Series II sedan. Muffler arrangement, tips and material aren't published in our record, so we confirm those against the kit instead of quoting them.
What does a 2in cat-back change on the Statesman?
A cat-back is the rear half of the exhaust — from the catalytic converter back to the tip — so it reshapes flow and note while the cat and engine-side hardware stay factory. On a heavier long-wheelbase V8 like the WM, that's the usual road change because it leaves the emissions gear alone. The 2in bore steps up from standard; we hold no sound or power data for the PP5381-06, so no figures are quoted for either.
Will it suit my Holden Statesman WM?
It's listed to fit the Holden Statesman WM Series I and II Gen IV 6.0 V8 sedan from 2006. Across two series the WM had running changes, so confirm which one you have. Feed data can be imperfect — send the workshop your exact WM variant and build date and we'll match it to the listing before ordering.
What does fitting involve at our Illawarra workshop?
Oak Flats Muffler Men supplies and fits Pacemaker systems in-house across the Illawarra. The PP5381-06 comes in at a listed RRP of $2,537.89, then the Statesman goes on the hoist to check the longer rear run for clearances and hanger points before the bay is booked. We're the fitter rather than the maker, so we'll flag anything Pacemaker hasn't published.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- Is the PP5381-06 specific to the long-wheelbase Statesman?
- Yes — it's listed for the Holden Statesman WM Series I and II Gen IV 6.0 V8 sedan, which is the long-wheelbase body. Confirm your exact series with the workshop.
- Does it keep the catalytic converter?
- Yes — it's a cat-back, so the factory catalytic converter and engine-side pipework stay in place. Confirm your build with the workshop.
- What's the RRP?
- The listed RRP is $2,537.89. We supply and fit it at our Illawarra workshop; ask us to confirm pricing and availability for your WM Statesman.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More complete exhaust systems the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
Holden VT VX VY 6 Cylinder Wagon
PacemakerRRP$3800.30Holden VT VX VY 6 Cylinder Wagon. Fast shipping, warranty included.
View part
Holden VZ 6 Cylinder Ute
PacemakerRRP$3800.30Holden VZ 6 Cylinder Ute.
View part
Holden VZ 6 Cylinder Wagon
PacemakerRRP$3800.30Holden VZ 6 Cylinder Wagon. Fast shipping, warranty included.
View part
Holden VE Jul 2006 - Mar 2013 6.0 Gen IV 6.0 V8 3" Cat Back Sedan/Wagon
PacemakerRRP$2768.00Holden VE Jul 2006 - Mar 2013 6.0 Gen IV 6.0 V8 3" Cat Back Sedan/Wagon System.
View part
Holden Statesman WM Series I And Series II Aug 2006 - Jun 2013 Gen IV
PacemakerRRP$2768.00Pacemaker Holden Statesman WM Series I And Series II Aug 2006 - Jun 2013 Gen IV 6.0 V8 3" Cat Back Sedan System.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.