HSV VE (E Series) E2 Sep 2009 - Aug 2010 LS2 V8 1 3/4" 4 into 1 Headers
PacemakerRRP$5060.93HSV VE (E Series) E2 Sep 2009 - Aug 2010 LS2 V8 1 3/4" 4 into 1 Headers 3" Sedan Only System (SKU: PP5381-63), $5060.93 from Pacemaker. Engineered
View partPP5382-03
HSV VE (E Series) E2 From Sep 2009 - Aug 2010 LS2 V8 1 7/8" 4 into 1 Competition Headers
HSV VE (E Series) E2 From Sep 2009 - Aug 2010 LS2 V8 1 7/8" 4 into 1 Competition Headers 2 1/2" Sedan System (PP5382-03) at $4890.77 RRP.
BrandPacemaker
Category: Extractors and headers
RRP $4890.77 AUD
Confirmed on orderAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- PP5382-03
- Supplier
- Pacemaker
- Category
- Extractors and headers
- Vehicle fitment
- Hsv Ve
- Stock status
- Confirmed on order
Listed to the HSV VE E-Series E2 window — September 2009 to August 2010 — the Pacemaker PP5382-03 carries competition 1⅞ in 4-into-1 headers into a 2½ in sedan system on the LS2 V8. The E2 date range is what sets this part apart from the earlier E1 listing.
Why is the E2 fitment its own part?
The E-Series E2 ran a short Sep-2009-to-Aug-2010 window with its own specification, so Pacemaker carries a dedicated part number tied to that range rather than the broader E1. If your VE was built in that window, this is the listing that matches it; we confirm the build date before ordering.
What does the competition 1⅞ in 4-into-1 deliver?
The four 1⅞ in primaries merge in a single 4-into-1 collector and step into the 2½ in sedan run. At 1⅞ in the primary bore is the larger, higher-rpm size — built for an engine making more, trading a little low-down velocity for top-end flow. It replaces the cast LS2 manifolds with mandrel-bent tube.
Will it suit my VE E2 sedan?
It's listed to fit the HSV VE E-Series E2 (LS2 V8, Sep 2009–Aug 2010) sedan, with the 2½ in system routed for the sedan body. We treat that as listed-to-fit and confirm against your exact build date — the narrow E2 window is the detail to verify.
What does fitting involve at our Illawarra workshop?
Oak Flats Muffler Men fits these competition headers across the Illawarra. We match the listing to your E2, pull the cast manifolds, fit the 1⅞ in primaries to the 4-into-1 collectors, and run the 2½ in sedan system on fresh gaskets. RRP is listed at 4890.77 AUD; fitting is quoted on the vehicle.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- What's the difference between this and the E1 listing?
- This one is tied to the E2 build window, September 2009 to August 2010. Confirm your VE's build date with the workshop so we order the right series.
- What system diameter does it use?
- A 2½ in sedan system, matched to the competition 1⅞ in 4-into-1 headers.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
HSV VE (E Series) E2 From Sep 2009 - Aug 2010 LS2 V8 1 7/8" 4 into 1
PacemakerRRP$5060.93HSV VE (E Series) E2 From Sep 2009 - Aug 2010 LS2 V8 1 7/8" 4 into 1 Headers 3" Sedan Only System.
View part
HSV E2 VE 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Tri-Y Headers 3" Inch
PacemakerRRP$4944.11HSV E2 VE 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Tri-Y Headers 3" Inch System.
View part
HSV VE (E Series) E1 From Sep 2006 - Aug 2009 LS2 V8 1 7/8" 4 into 1
PacemakerRRP$4891.13Pacemaker HSV VE (E Series) E1 From Sep 2006 - Aug 2009 LS2 V8 1 7/8" 4 into 1 Competition Headers 3" Sedan System.
View part
HSV VE (E Series) E2 From Sep 2009 - Aug 2010 LS2 V8 1 3/4" 4 into 1
PacemakerRRP$4890.77Pacemaker HSV VE (E Series) E2 From Sep 2009 - Aug 2010 LS2 V8 1 3/4" 4 into 1 Header 2 1/2" Sedan Only System.
View part
HSV Sedan VF GTS-R LSA GEN-F 2 inch 4 Into 1 Competition Headers 3" inch
PacemakerRRP$4863.39HSV Sedan VF GTS-R LSA GEN-F 2 inch 4 Into 1 Competition Headers 3" inch Sedan System (SKU: PP5385-55), $4863.39 from Pacemaker.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.