PR398S

PR398S Shock Absorber Nitro for Nissan Navara D40 ALL Excluding STX550 Ute/dual CAB

RAW 4x4 PR398S Shock Absorber Nitro.

BrandRAW 4x4

Category: Suspension and 4x4 parts

RRP pending
Confirmed on order
Afterpay, Zip Pay & Zip Money available
Afterpay acceptedZip accepted — Zip Pay and Zip Money
PR398S Shock Absorber Nitro for Nissan Navara D40 ALL Excluding STX550 Ute/dual CAB (all Variants with Abs) product image

Part specs

heights
['50mm']
positions
['Rear']
shock_types
['predator']
vehicle_count
2

Listed to fit the Nissan Navara D40 dual-cab ute, the RAW 4x4 PR398S is a Nitro-series shock absorber covering the ABS-equipped variants but not the STX550. It swaps in for a worn factory damper without altering the truck's spring setup.

Where does the PR398S sit in the suspension?

The shock absorber is the damping half of the suspension — it manages how quickly the wheel moves up and down, working alongside whatever coil or leaf the D40 already runs. The PR398S is RAW 4x4's Nitro-series replacement for that role, the part you reach for when the original is leaking or letting the back end bounce. It controls movement only; it doesn't carry load or change how high the ute sits.

Is it the right shock for my Navara?

It's listed to fit the Nissan Navara D40 dual-cab ute across all ABS variants, with the STX550 excluded because that grade uses a different damper. The supplier hasn't published the model years or front/rear position, so it's worth confirming your exact build and which corner you're replacing with the workshop first.

How do we fit it in the Illawarra?

Oak Flats Muffler Men replaces dampers like the PR398S in our Oak Flats workshop. We fit shocks as a matched pair so the Navara settles level, look over the bushes, mounts and the partner shock while the wheel's off, and double-check the listing exclusion before ordering so an STX550 doesn't end up with the wrong part.

What about price and ordering?

RAW 4x4 hasn't published a set price for the PR398S, so we quote it on order: send through your D40 variant and the position you need and we'll confirm cost and availability before it's brought in, rather than guessing at a part number across an excluded variant.

Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.

Common questions

Will the PR398S suit my Navara D40?
It's listed to fit the D40 dual-cab ute with ABS, excluding the STX550. Confirm your variant and the position with the workshop before ordering.
Does it change the ride height?
No. A shock controls movement, not height. Ride height is set by the springs, which we can quote separately if you want a lift.

Fitment support across the Illawarra

Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.
Show nearby fitment areasCollapse section

Book the right exhaust job without guessing.

Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.