PR898S-2418

PR898S 2418 Shock Absorber Nitro for Ford Ranger PX I & II (t6) UTE / Dual CAB

PR898S 2418 Shock Absorber Nitro. Quality guaranteed.

BrandRAW 4x4

Category: Suspension and 4x4 parts

RRP pending
Confirmed on order
Afterpay, Zip Pay & Zip Money available
Afterpay acceptedZip accepted — Zip Pay and Zip Money
PR898S 2418 Shock Absorber Nitro for Ford Ranger PX I & II (t6) UTE / Dual CAB product image

Part specs

heights
['40mm']
positions
['Front']
shock_types
['predator']
vehicle_count
2

RAW 4x4's PR898S-2418 is a Nitro-series shock absorber for the Ford Ranger PX I and II (T6) ute and dual-cab, with the -2418 code identifying its particular length within the PR898S range for that platform.

How the spring and shock split the work

On the PX Ranger the coil or leaf carries the weight and sets ride height; the PR898S-2418 is the damper that controls how that spring moves, settling the body after each bump instead of letting it pogo. Pairing the correct length shock to the spring it works against is what keeps the ute composed, which is why the -2418 suffix matters more than the headline part number.

What 'Nitro' actually tells you

Nitro is RAW 4x4's nitrogen-charged damper line. The gas charge sits behind the oil and helps it resist foaming when the shock is worked hard on long dirt sections — useful on a Ranger that tours loaded. It's a description of how the unit is built, not a performance figure, and RAW 4x4 publishes no valving or travel numbers in our record, so we don't invent any.

Is the PR898S-2418 right for my Ranger?

It's listed to fit the Ford Ranger PX I and II (T6) ute and dual-cab — the generation sharing its underpinnings with the Mazda BT-50. Because PX I and PX II use the same basic chassis, the listing covers a wide span of build years. Send us your exact model and which end you're replacing and we'll confirm the -2418 and whether you need a pair or a full set.

Supplied and fitted at Oak Flats

Oak Flats Muffler Men fits RAW 4x4 shocks in our Illawarra bays. Worn dampers are easy to miss, so we check the bushes, mounts and the old units before fitting the PR898S-2418 and resettle the suspension afterwards. As a price-pending line, we confirm cost and availability with you before placing the order.

Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.

Common questions

Will the PR898S-2418 fit my PX Ranger?
It's listed for the Ford Ranger PX I and II (T6) ute and dual-cab. Confirm your exact model and the axle you're doing with the workshop first.
What does the nitrogen charge do?
It keeps the damper oil under pressure so it resists foaming on long corrugations. RAW 4x4 supplies it; Oak Flats Muffler Men fits it.
One shock or a set?
That depends on the end you're doing and your setup. We confirm the quantity when you bring the vehicle in.

Fitment support across the Illawarra

Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.
Show nearby fitment areasCollapse section

Book the right exhaust job without guessing.

Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.