RC-0506

RC 0506 Coil Spring for Ford Maverick Y60 SWB Wagon

RC 0506 Coil Spring.

BrandRAW 4x4

Category: Suspension and 4x4 parts

RRP pending
Confirmed on order
Afterpay, Zip Pay & Zip Money available
Afterpay acceptedZip accepted — Zip Pay and Zip Money
RC 0506 Coil Spring for Ford Maverick Y60 SWB Wagon product image

Part specs

heights
['40mm', '50mm']
positions
['Rear']
shock_types
[]
vehicle_count
4

The short-wheelbase Y60 is a different beast under the body, and it runs its own coils. The RAW 4x4 RC-0506 is a coil spring listed to fit the Ford Maverick Y60 SWB wagon — the stubby, three-door version of Nissan's Y60 platform sold here as the Maverick.

Why the SWB calls out its own spring

The short-wheelbase Y60 puts its weight over a tighter footprint than the long wagon, so the coil that suits it isn't the same as the LWB part. The spring carries the corner and sets ride height; as the factory coils sag the SWB sits low and clearance drops. The RC-0506 is the direct replacement that resets that stance, with the dampers controlling movement once the spring is back to spec. No rate or free-length figure is published, so we don't quote one.

Maverick and Patrol share the Y60

The Y60 was sold here as the Ford Maverick and, badged differently, as the Nissan Patrol, so listings for the two often overlap. This RC-0506 is listed to the Maverick Y60 SWB wagon. Coil applications still hinge on the exact body and how the vehicle is loaded, so we check the listing against your actual build rather than going on the badge alone.

Is a coil spring a compliance item?

A coil spring is a chassis part, not emissions hardware, so it doesn't carry the catalytic-converter or muffler compliance questions an exhaust would. Where a spring alters ride height, NSW engineering requirements depend on the overall build and we'll talk that through. RAW 4x4 publishes no compliance approval in this listing and we won't imply one.

Fitted in the Illawarra

Oak Flats Muffler Men fits coil springs in-house across the Illawarra. We match the RAW 4x4 listing to your build, check the mounting points and clearances on the vehicle, and quote labour once we've seen it. It's listed to fit the Maverick Y60 SWB wagon; confirm your exact build with us before ordering.

Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.

Common questions

Will the RC-0506 fit my Maverick Y60 SWB?
It's listed to fit the Ford Maverick Y60 SWB wagon. We confirm the exact body and drivetrain against the listing before ordering.
Is this the short-wheelbase spring?
Yes — it's listed for the SWB wagon. The LWB Y60 uses a different coil.
Do you publish the spring rate or lift height?
No — RAW 4x4 doesn't publish those here, so we don't quote them. We confirm the application and your load needs in person.

Fitment support across the Illawarra

Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.
Show nearby fitment areasCollapse section

Book the right exhaust job without guessing.

Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.