RC-2295

RC 2295 Coil Spring for Nissan Patrol Y62 Series 3 with Hydraulic Body Motion Control

RAW 4x4 RC 2295 Coil Spring.

BrandRAW 4x4

Category: Suspension and 4x4 parts

RRP pending
Confirmed on order
Afterpay, Zip Pay & Zip Money available
Afterpay acceptedZip accepted — Zip Pay and Zip Money
RC 2295 Coil Spring for Nissan Patrol Y62 Series 3 with Hydraulic Body Motion Control Coil Springs Only Wagon product image

Part specs

heights
['40mm']
positions
['Rear']
shock_types
[]
vehicle_count
1

Listed as coil springs only, the RAW 4x4 RC-2295 is a Nissan Patrol Y62 Series 3 coil for wagons equipped with Hydraulic Body Motion Control. It replaces the ride-height coil while leaving the HBMC system untouched.

What does the RC-2295 actually replace?

This part is the coil spring alone, for a Y62 Series 3 wagon with Hydraulic Body Motion Control. It swaps the standing-height coil and is meant to sit within the existing HBMC arrangement rather than alter the body-control hardware. The record gives the fitment and coil-springs-only scope; it carries no published lift or load figure, so those are confirmed at the bench.

Will it suit my Y62 Patrol wagon?

It is listed to fit the Nissan Patrol Y62 Series 3 wagon with HBMC. As the HBMC variant is specific, send your build and we will confirm the RC-2295 matches your chassis before ordering.

Why specify the HBMC variant?

Coils for the Hydraulic Body Motion Control Y62 are listed separately from conventional cars because the system is tuned around its suspension. The RC-2295 is the HBMC-listed coil, which is why getting the fitment confirmed avoids upsetting how the factory body control behaves.

What does fitting involve at our Illawarra workshop?

Oak Flats Muffler Men supplies and fits coils at our Illawarra workshop. We confirm the RC-2295 suits your HBMC chassis, set the ride height and check it sits level afterwards. It is a brought-in item; we confirm pricing and availability with you before placing the order.

Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.

Common questions

Does the RC-2295 keep the HBMC system?
Yes. It is coil springs only and works alongside the factory Hydraulic Body Motion Control hardware.
What vehicle is it for?
The Nissan Patrol Y62 Series 3 wagon with HBMC. Confirm your exact variant with the workshop.
Is a lift height listed?
No lift or rate is published in our record. Suitability is confirmed at fitting.

Fitment support across the Illawarra

Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.
Show nearby fitment areasCollapse section

Book the right exhaust job without guessing.

Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.