RC-2566

RC 2566 Coil Spring for Ford Everest Next Generation UB 3LTR V6 Diesel

RC 2566 Coil Spring.

BrandRAW 4x4

Category: Suspension and 4x4 parts

RRP pending
Confirmed on order
Afterpay, Zip Pay & Zip Money available
Afterpay acceptedZip accepted — Zip Pay and Zip Money
RC 2566 Coil Spring for Ford Everest Next Generation UB 3LTR V6 Diesel (3ltr 6CYL Turbo Diesel) product image

Part specs

heights
['40mm']
positions
['Front']
shock_types
[]
vehicle_count
2

The RAW 4x4 RC-2566 is a coil spring listed for the Next-Generation Ford Everest (UB platform) fitted with the 3.0L V6 turbo-diesel. It's the corner's load-bearer — the spring you change when the standard coils have tired or a different load setup is called for.

What the coil does on the V6 Everest

On the Next-Gen Everest the coil carries the weight at its corner, holds the resting height and lets the wheel move through its travel; the shock manages the speed of that movement. Over time, or under the weight of accessories and touring loads, the factory coils lose height. The RC-2566 is a direct coil replacement that restores stance and travel — and since RAW 4x4 lists no free length or rate, we won't put a figure on it.

Fitment to a Next-Gen Everest UB (3.0L V6)

It's catalogued for the Next-Generation Ford Everest on the UB platform with the 3.0L V6 turbo-diesel. The UB platform also sits under the Volkswagen Amarok, so part listings can cross between the two; that's why we verify the spring against your specific body and engine rather than the badge. Pass us your build and we'll confirm the RC-2566 before it's ordered.

Is it road legal?

Being a chassis spring rather than an emissions part, a coil doesn't raise the catalytic-converter or muffler compliance questions that apply to exhaust work. If the spring changes ride height, any engineering or NSW rule depends on the full build — something we'll go through with you. No compliance approval is published by RAW 4x4 here, and we won't imply one.

How we fit it in the Illawarra

Oak Flats Muffler Men fits coil springs in-house across the Illawarra. We match the RAW 4x4 listing to your build, check the mounting points and clearances on the vehicle, and quote the work once it's up on the hoist. It's listed for the Next-Gen Ford Everest UB with the 3.0L V6 turbo-diesel; confirm your exact build with us before ordering.

Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.

Common questions

Will the RC-2566 fit my Next-Gen Everest UB (3.0L V6)?
It's listed for the Next-Generation Ford Everest (UB platform) with the 3.0L V6 turbo-diesel. We confirm the body and engine against the listing before ordering, as the UB platform is shared with the Volkswagen Amarok.
Do you have a rate or lift figure for it?
No — RAW 4x4 doesn't publish a rate or lift height in this listing, so we don't quote one. We confirm the application and your load needs with you directly.

Fitment support across the Illawarra

Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.
Show nearby fitment areasCollapse section

Book the right exhaust job without guessing.

Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.