RC-2606

RC 2606 Coil Spring for Ford Everest Next Generation UB 2LTR BI Turbo Diesel

RC 2606 Coil Spring.

BrandRAW 4x4

Category: Suspension and 4x4 parts

RRP pending
Confirmed on order
Afterpay, Zip Pay & Zip Money available
Afterpay acceptedZip accepted — Zip Pay and Zip Money
RC 2606 Coil Spring for Ford Everest Next Generation UB 2LTR BI Turbo Diesel (2ltr 4CYL Turbo Diesel) product image

Part specs

heights
['40mm']
positions
['Rear']
shock_types
[]
vehicle_count
2

Carrying the load and setting the height are a coil spring's two jobs, and the RAW 4x4 RC-2606 does both for the Next-Generation Ford Everest (UB platform) with the 2.0L bi-turbo four-cylinder diesel. It replaces a sagged or standard factory coil at the listed position.

Why replace a coil on the Everest?

The coil is the spring that bears the Everest's weight at its corner and holds the ride height the dampers work against. Time and load take their toll: a coil that's settled lets the body drop and shortens usable travel. Fitting the RC-2606 brings the corner back to its intended height and gives the suspension its movement back. RAW 4x4 lists no free length or spring rate here, so we won't state one.

Suiting it to a Next-Gen Everest UB

It's listed to fit the Next-Generation Ford Everest, UB platform, with the 2.0L bi-turbo four-cylinder diesel. Coil fitment depends on the exact body, drivetrain and how the vehicle is loaded, so we check the listing against your actual Everest before ordering rather than trusting the badge alone.

Where it stands on compliance

A coil spring is chassis hardware, not an emissions part, so it doesn't bring the catalytic-converter or muffler compliance questions an exhaust would. If a spring changes ride height, any engineering or NSW requirement rests on the overall build, and we'll go through that with you. RAW 4x4 publishes no compliance approval in this listing, and we won't imply one.

Fitting it at our Oak Flats workshop

Oak Flats Muffler Men fits coil springs in-house across the Illawarra. We match the RAW 4x4 listing to your build, inspect the mounts and clearances on the vehicle, and quote the labour once it's seen. It's listed for the Next-Gen Ford Everest UB with the 2.0L bi-turbo diesel — confirm your exact build with the workshop before ordering.

Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.

Common questions

Will the RC-2606 fit my Next-Gen Ford Everest UB (2.0L bi-turbo diesel)?
It's listed to fit the Next-Generation Ford Everest (UB platform) with the 2.0L bi-turbo four-cylinder diesel. We confirm the body and drivetrain against the listing before ordering.
Is a lift height or rate published?
No — RAW 4x4 publishes neither in this listing, so we don't quote one. We confirm the application and your load needs with you in person.

Fitment support across the Illawarra

Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.
Show nearby fitment areasCollapse section

Book the right exhaust job without guessing.

Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.