RL1411

RL1411 Leaf Spring for Ford Ranger T6.2 Next GEN 4 Cyl. Excluding Raptor UTE / Dual CAB

RL1411 Leaf Spring.2 Next GEN 4 Cyl. Excluding Raptor UTE / Dual CAB for selected vehicle applications.

BrandRAW 4x4

Category: Suspension and 4x4 parts

RRP pending
Confirmed on order
Afterpay, Zip Pay & Zip Money available
Afterpay acceptedZip accepted — Zip Pay and Zip Money
RL1411 Leaf Spring for Ford Ranger T6.2 Next GEN 4 Cyl. Excluding Raptor UTE / Dual CAB product image

Part specs

heights
['40mm']
positions
['Rear']
shock_types
[]
vehicle_count
4

The RAW 4x4 RL1411 is a replacement rear leaf spring listed to fit the Ford Ranger T6.2 Next-Gen (excluding Raptor), ute dual-cab. As a leaf pack it carries the load and locates the live rear axle, so it's a load-and-ride-height part rather than a damping change.

What does a leaf spring do on a ute?

On a leaf-sprung rear like this one, the spring pack both supports the load and locates the axle fore-and-aft. The RL1411 is the rear spring component for the Ford Ranger T6.2 Next-Gen; it's what sets how the tray sits and how much weight the back can carry before it sags. Damping is handled separately by the shock absorbers, so a leaf change addresses load and ride height, not bump control.

Is this a load or a lift spring?

The supplier hasn't published a rated capacity, arch, or lift figure against the RL1411 listing, so we won't quote one. Leaf packs in this category are typically chosen for constant load, towing, or a modest rear lift, but the exact intent for this part number is confirmed with the supplier before order rather than guessed from the title.

Will it suit my Ford Ranger T6.2 Next-Gen?

It's listed to fit the Ford Ranger T6.2 Next-Gen (excluding Raptor), ute dual-cab. Rear spring fitment depends on the exact build, axle and any existing accessories, so send us your variant and we'll confirm the RL1411 is the right pack before we order it in.

What does fitting involve at our Illawarra workshop?

Oak Flats Muffler Men supplies and fits suspension parts like this in-house across the Illawarra. A rear leaf change means supporting the axle, swapping the pack, and resetting the U-bolts and shackles; we check the rear height and the related bushes while it's apart.

Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.

Common questions

Does the RL1411 fit my Ford Ranger T6.2 Next-Gen?
It's listed to fit the Ford Ranger T6.2 Next-Gen (excluding Raptor), ute dual-cab. Confirm your exact variant with the workshop before ordering, as rear spring fitment varies by build.
Is a load capacity published for this spring?
No, RAW 4x4 doesn't list a rated capacity, arch or lift figure for the RL1411 here. We confirm the spec with the supplier before we order it in for you.
Will I need new U-bolts or bushes too?
Often worth doing while the pack is out. We assess the shackles, bushes and U-bolts during fitting and advise if anything needs replacing.

Fitment support across the Illawarra

Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.
Show nearby fitment areasCollapse section

Book the right exhaust job without guessing.

Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.