RL883

RL883 Leaf Spring for Nissan Navara D40 ALL Excluding STX550 Ute/dual CAB

RL883 Leaf Spring. Fast shipping, warranty included.

BrandRAW 4x4

Category: Suspension and 4x4 parts

RRP pending
Confirmed on order
Afterpay, Zip Pay & Zip Money available
Afterpay acceptedZip accepted — Zip Pay and Zip Money
RL883 Leaf Spring for Nissan Navara D40 ALL Excluding STX550 Ute/dual CAB (all Variants with Abs) product image

Part specs

heights
['40mm']
positions
['Rear']
shock_types
[]
vehicle_count
2

Unlike a shock, the RAW 4x4 RL883 is a load-carrying leaf spring — listed to fit the Nissan Navara D40 dual-cab ute, all ABS variants except the STX550. It's the part that actually carries the rear of the ute and sets how the tray sits.

What does a rear leaf spring do?

On a leaf-sprung ute like the D40, the rear leaf pack supports the load and the back of the body, setting ride height and how the tray copes with weight. The RL883 is RAW 4x4's replacement leaf spring for that job — the part you fit when the original pack has sagged, flattened or lost its arch and the back end rides low or bottoms out under a load.

Does the RL883 suit my D40?

It's listed to fit the Nissan Navara D40 dual-cab ute across all ABS variants, with the STX550 excluded. The supplier doesn't publish a specific load rating or arch height, so if you carry or tow regularly, talk to the workshop about what the RL883 is rated to do before ordering rather than assuming a capacity.

What's involved in fitting it?

Oak Flats Muffler Men fits leaf springs like the RL883 in Oak Flats, across the Illawarra. Leaf work means dropping the axle, swapping the pack and resetting the U-bolts and shackle hardware, so we inspect the bushes, pins and U-bolts at the same time and confirm the D40 isn't an STX550 before we start.

How is it priced and sourced?

RAW 4x4 hasn't published a fixed price for the RL883, so we handle it as a special-order item: confirm your D40 variant with us and we'll quote the spring and any hardware it needs before bringing it in, so the rear suspension job is costed properly up front.

Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.

Common questions

Is the RL883 a single leaf or a full pack?
It's listed as a leaf spring for the D40; the exact pack configuration isn't published by the supplier. Confirm the detail with the workshop before ordering.
Will it lift the back of my Navara?
Ride height depends on the pack's spec, which isn't published. We can confirm what the RL883 sets the rear at before fitting.

Fitment support across the Illawarra

Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.
Show nearby fitment areasCollapse section

Book the right exhaust job without guessing.

Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.