RL884

RL884 Leaf Spring for Nissan Navara D40 ALL Excluding STX550 Ute/dual CAB

RL884 Leaf Spring.

BrandRAW 4x4

Category: Suspension and 4x4 parts

RRP pending
Confirmed on order
Afterpay, Zip Pay & Zip Money available
Afterpay acceptedZip accepted — Zip Pay and Zip Money
RL884 Leaf Spring for Nissan Navara D40 ALL Excluding STX550 Ute/dual CAB (all Variants with Abs) product image

Part specs

heights
['40mm']
positions
['Rear']
shock_types
[]
vehicle_count
2

The RAW 4x4 RL884 is a rear leaf spring listed to fit the Nissan Navara D40 dual-cab ute, covering the ABS variants and excluding the STX550. As a spring rather than a damper, it's what carries the back of the ute and sets the tray's ride height.

Leaf spring, not shock — what's the difference?

A shock controls movement; a leaf spring carries weight. The RL884 is the load-bearing pack for the rear of the D40, the part that holds the tray up and determines how the ute sits under a load. You fit it when the original leaves have sagged or lost their shape and the back end is riding low, dragging on bumps, or no longer recovering after a heavy load.

Is the RL884 right for my Navara?

It's listed to fit the Nissan Navara D40 dual-cab ute, all variants with ABS, with the STX550 excluded. The supplier hasn't published the leaf count, arch or load rating, so if load capacity matters for your use, confirm what the RL884 is rated for with the workshop before you order.

How do we fit a leaf pack at Oak Flats?

Oak Flats Muffler Men fits leaf springs like the RL884 in-house across the Illawarra. The job involves supporting the axle, removing the old pack and re-torquing the U-bolts and shackles, so we check the bushes, pins and U-bolts while we're in there and verify the build isn't an STX550 first.

Pricing and ordering the RL884

RAW 4x4 hasn't set a published price on the RL884, so we treat it as quote-on-order: tell us your D40 variant and what you carry and we'll confirm the spring and the hardware it pairs with before it comes in, keeping the whole rear job costed clearly.

Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.

Common questions

Does the RL884 fit the STX550?
No — the STX550 is excluded from this listing. The RL884 covers the rest of the D40 dual-cab range with ABS. Confirm your variant with the workshop.
What load is it rated to?
The supplier doesn't publish a load rating for the RL884. The workshop can confirm what it's suited to before fitting.

Fitment support across the Illawarra

Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.
Show nearby fitment areasCollapse section

Book the right exhaust job without guessing.

Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.