SSMBM319MF

DT Ram 1500 V8 Hemi 5.7L 3in Rhs Rear Muffler

DT Ram 1500 V8 Hemi 5.7L 3in Rhs Rear Muffler (SSMBM319MF) fits selected vehicle applications.

BrandMantaMPI Automotive

Category: Mufflers and resonators

RRP $575.26 AUD
In stock at supplier
Afterpay, Zip Pay & Zip Money available
Afterpay acceptedZip accepted — Zip Pay and Zip Money
DT Ram 1500 V8 Hemi 5.7L 3in Rhs Rear Muffler product image

Part specs

SKU
SSMBM319MF
Supplier
MPI Automotive
Category
Mufflers and resonators
Stock status
In stock at supplier

Built at 3in for the big HEMI V8, the MPI Automotive SSMBM319MF is the right-hand-side rear muffler listed to fit the DT-series RAM 1500 5.7L V8.

Why 3in on the RAM 1500?

The 3in bore is the headline here: it's the larger pipe size suited to a big-displacement V8 like the RAM's 5.7L HEMI, where the extra cross-section lets the engine breathe through the rear of the system. The SSMBM319MF is a chambered rear muffler that quietens by absorption and reflection, so at 3in it carries the silencing for the right side without pinching the flow a V8 this size wants.

Which side and which truck does it suit?

This is the right-hand-side rear muffler, listed to fit the DT-series RAM 1500 with the 5.7L V8 HEMI. On a dual-rear truck each side is its own unit, so the RHS hangs and exits on the passenger side. Confirm your exact DT build and whether you're matching it to the left-hand unit with the workshop before ordering.

Is it road legal?

A rear muffler is a silencing component, not a catalytic converter or any emissions sensor, so it leaves the RAM's factory cats and hardware in place. It changes the note on the right side of the truck, not what it emits. Confirm any state requirements with the workshop.

What does fitting involve at our Illawarra workshop?

Oak Flats Muffler Men fits RAM 1500 rear mufflers in-house across the Illawarra. With a 3in body on a heavy dual-cab we check the hanger load and clearance to the tray and tow gear on the right side. Send your DT build and we'll confirm fitment and book the bay.

Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.

Common questions

Is this the left or right muffler?
It's the right-hand-side rear muffler for the DT RAM 1500. The left side is a separate unit, so confirm whether you need both with the workshop.
Why is it 3in?
The 3in bore suits the 5.7L HEMI V8's flow through the rear of the system — a larger pipe for a big-displacement engine.

Fitment support across the Illawarra

Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.
Show nearby fitment areasCollapse section

Book the right exhaust job without guessing.

Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.