SSMBM342MF

DS Ram 1500 V8 Hemi 5.7L 3in Rhs Rear Muffler

MPI Automotive DS Ram 1500 V8 Hemi 5.7L 3in Rhs Rear Muffler.

BrandMantaMPI Automotive

Category: Mufflers and resonators

RRP $575.26 AUD
In stock at supplier
Afterpay, Zip Pay & Zip Money available
Afterpay acceptedZip accepted — Zip Pay and Zip Money
DS Ram 1500 V8 Hemi 5.7L 3in Rhs Rear Muffler product image

Part specs

SKU
SSMBM342MF
Supplier
MPI Automotive
Category
Mufflers and resonators
Stock status
In stock at supplier

The MPI Automotive SSMBM342MF is a 3in rear muffler for the RAM 1500 V8. It is the right-hand-side rear unit — the silencer that sits at the back of the system on the passenger bank, where the last of the noise control happens before the tailpipe.

What does the RHS rear muffler do?

A rear muffler is the final silencing stage in the system. On the RAM 1500 this is the right-hand-side rear unit, fitting at the back of the truck where it sets the tailpipe note and trims the last of the resonance. Because it is the rear can rather than the centre, swapping it lets you renew a rusted or blowing rear section, or adjust the character at the tailpipe, without disturbing the rest of the run.

Why a 3in body on a V8 ute?

The SSMBM342MF is built around a 3in bore as listed by the supplier — sized for the airflow of a large-capacity V8 like the RAM's. A bigger-bore muffler keeps the system flowing freely at the back of the truck rather than pinching it down at the last stage. It is a like-for-like rear replacement, so the rest of the system carries on as it was.

Will it suit my RAM 1500?

This unit is listed to fit the V8 RAM 1500. RAM exhaust hardware varies by year and build, and this is specifically the right-hand-side rear position, so confirm your exact truck and which side you need with the workshop before ordering. We would rather check the side than have you fit the wrong-hand unit.

What does fitting involve at our Illawarra workshop?

Oak Flats Muffler Men fits this rear muffler in-house. We confirm it is the correct side, check the rear hangers and the clearance to the tray and bumper, then mount it so the tailpipe sits where it should. Send your build details and we will confirm fitment and book the bay.

Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.

Common questions

Which side does the SSMBM342MF fit?
It is the right-hand-side rear muffler on the RAM 1500 V8. Confirm the side you need with the workshop before ordering.
What bore is it?
It is built to a 3in bore as listed by the supplier, sized for the airflow of the RAM's V8.
Does it change the rest of the exhaust?
No — it is the rear muffler only, so the centre and front sections of your system stay in place.

Fitment support across the Illawarra

Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.
Show nearby fitment areasCollapse section

Book the right exhaust job without guessing.

Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.