HSV VE E2 Sedan Wagon 3in Catback Muffler
MPI AutomotiveRRP$4027.11HSV VE E2 Sedan Wagon 3in Catback Muffler/Muffler (SKU: SSMKHN0178) Engineered. Quality guaranteed.
View partSSMBM378MF-R8113
Holden VY - VZ 5.7L V8 1 ton, Crewman Ute 2 1/2in Dual Centre Muffler
Holden VY - VZ 5.7L V8 1 ton, Crewman Ute 2 1/2in Dual Centre Muffler (SKU: SSMBM378MF-R8113) Engineered for
BrandMantaMPI Automotive
Category: Mufflers and resonators
RRP $1170.76 AUD
In stock at supplierAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- SSMBM378MF-R8113
- Supplier
- MPI Automotive
- Category
- Mufflers and resonators
- Stock status
- In stock at supplier
The MPI Automotive SSMBM378MF-R8113 is a dual centre muffler for the Holden VY–VZ 5.7L V8 1-Tonne Crewman ute. As the mid-system muffler it controls the note from the centre of the run, carrying both sides through together on the Crewman's tray-back layout.
What does the dual centre muffler do on the Crewman?
This is the centre quietening stage, run as a dual layout. A chambered/absorptive muffler in the middle of the system softens the note before it reaches the rear, taking the edge off resonance through the centre of the ute. The dual arrangement keeps both sides flowing while the muffler body does the quietening. It's the centre component specifically — not a full system and not a rear muffler — so it pairs with whatever front and rear pipework the Crewman is running. On a 1-Tonne ute the centre run shares space with the chassis and tray, so the routing matters.
Which Holden is it listed for?
It's listed to fit the Holden VY–VZ 5.7L V8 in the 1-Tonne Crewman ute. That's the tray-back, cab-chassis-derived Crewman rather than the sedan or wagon, so the centre routing and length are specific to that body. Because the VY and VZ ran across several years, confirm your exact model and the centre hanger arrangement with the workshop before ordering so the pipework and mounts line up on your truck.
Is it road legal?
This is a centre muffler only — it doesn't include or delete the catalytic converter, so the cat-delete off-road rules don't apply to this part. The finished note depends on the whole system; confirm the in-service result and any state requirements with the workshop before fitting.
What does fitting involve at our Illawarra workshop?
Oak Flats Muffler Men fits Crewman centre mufflers in-house across the Illawarra, checking the dual feeds mate cleanly and the body clears the floor, chassis and tray. The SSMBM378MF-R8113 carries a published RRP of $1,170.76; send your build and we'll confirm fitment and book the bay.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- Will it fit my Crewman?
- It's listed to fit the Holden VY–VZ 5.7L V8 1-Tonne Crewman ute. Confirm your exact model and centre hanger setup with the workshop before ordering.
- Is this the whole exhaust?
- No — it's the dual centre muffler section only. It pairs with your existing front and rear pipework.
- What does it cost?
- The supplier RRP is $1,170.76. Contact Oak Flats Muffler Men to confirm price and fitting.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More mufflers and resonators the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
Holden Commodore VE Ute & Maloo V8 3in Catback Muffler
MPI AutomotiveRRP$3830.49Holden Commodore VE Ute & Maloo V8 3in Catback Muffler/Muffler (SSMKHN0196) Fits HOLDEN. Fast.
View part
Holden Commodore VE V8 Sedan Wagon 3in Catback Muffler
MPI AutomotiveRRP$3830.49Holden Commodore VE V8 Sedan Wagon 3in Catback Muffler/Muffler (SSMKHN0170) Fits HOLDEN. Fast.
View part
HSV VE E2 Sedan Wagon 3in Catback Hotdog/Muffler
MPI AutomotiveRRP$3812.47HSV VE E2 Sedan Wagon 3in Catback Hotdog/Muffler (SKU: SSMKHN0179) Engineered. Quality guaranteed.
View part
VF HSV Ute Maloo V8 3in CatBack Muffler
MPI AutomotiveRRP$3749.44VF HSV Ute Maloo V8 3in CatBack Muffler/Muffler (SSMKHN0337) Fits HOLDEN. Fast shipping, warranty included.
View part
VF HSV V8 Sedan Wagon 3in Catback Muffler
MPI AutomotiveRRP$3749.44VF HSV V8 Sedan Wagon 3in Catback Muffler/Muffler (SKU: SSMKHN0333) Engineered. Quality guaranteed.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.