HSV VE E2 Sedan Wagon 3in Catback Muffler
MPI AutomotiveRRP$4027.11HSV VE E2 Sedan Wagon 3in Catback Muffler/Muffler (SKU: SSMKHN0178) Engineered. Quality guaranteed.
View partSSMBM480MF
Holden Commodore VE SS+Maloo Ute V8 6.0L 3in Dual Rear Mufflers (Pair)
MPI Automotive Holden Commodore VE SS+Maloo Ute V8 6.0L 3in Dual Rear Mufflers (Pair).
BrandMantaMPI Automotive
Category: Mufflers and resonators
RRP $1768.16 AUD
In stock at supplierAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- SSMBM480MF
- Supplier
- MPI Automotive
- Category
- Mufflers and resonators
- Stock status
- In stock at supplier
Supplied as a matched pair, the MPI Automotive SSMBM480MF is a set of 3in rear mufflers listed to fit the Holden Commodore V8 ute. Because it's a left-and-right pair rather than a single can, both rear silencers are renewed together so the two sides of the dual exhaust stay even.
Why is it sold as a pair?
That's the point of difference here — the SSMBM480MF is a matched pair, not a single muffler. On a dual exhaust the two rear silencers are handed to suit the routing on each side of the ute, and fitting both at once keeps the note and the hanger geometry balanced rather than mixing a tired can with a fresh one. The 3in bore is the size this set is built around, so both sides of the rear section flow the same.
What does a rear muffler do on this ute?
A rear muffler is the last silencer before the tailpipe, so it has the final say on how the exhaust sounds and flows on its side. As a pair of 3in cans on the Commodore V8 ute, this set replaces both rear silencers in one job — a targeted change to the back of the system that leaves the front pipework and any emissions hardware ahead of it alone. No sound or power figures are published by the supplier for this part.
Will it suit my Holden Commodore ute?
It's listed to fit the Holden Commodore V8 ute. The record names Holden, the V8 engine and the ute body but not an exact series or year split, so send your specific build to the workshop and we'll confirm the rear hanger points and tailpipe routing on both sides before ordering. We treat the listing as a guide and check the vehicle on the hoist first.
What does fitting the pair involve in Illawarra?
Oak Flats Muffler Men supplies and fits this MPI Automotive pair in-house across the Illawarra. We hoist the ute, fit both 3in rear mufflers against the factory hangers, set the tailpipe clearance on each side and check the two match before sign-off. The SSMBM480MF is held at its listed RRP as a special-order item; we'll confirm availability when you book.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- Is the SSMBM480MF one muffler or two?
- It's a matched pair — both the left and right rear mufflers of the dual setup, supplied together. It's listed for the Holden Commodore V8 ute.
- What size are they?
- 3in, the bore this pair is built around. They're the rear mufflers, the last silencers before the tailpipes.
- Do I have to replace both sides?
- That's how it's supplied — as a pair — so both rear cans are renewed together and the two sides stay even. Confirm your exact ute build with the workshop before ordering.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More mufflers and resonators the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
Holden Commodore VE Ute & Maloo V8 3in Catback Muffler
MPI AutomotiveRRP$3830.49Holden Commodore VE Ute & Maloo V8 3in Catback Muffler/Muffler (SSMKHN0196) Fits HOLDEN. Fast.
View part
Holden Commodore VE V8 Sedan Wagon 3in Catback Muffler
MPI AutomotiveRRP$3830.49Holden Commodore VE V8 Sedan Wagon 3in Catback Muffler/Muffler (SSMKHN0170) Fits HOLDEN. Fast.
View part
HSV VE E2 Sedan Wagon 3in Catback Hotdog/Muffler
MPI AutomotiveRRP$3812.47HSV VE E2 Sedan Wagon 3in Catback Hotdog/Muffler (SKU: SSMKHN0179) Engineered. Quality guaranteed.
View part
VF HSV Ute Maloo V8 3in CatBack Muffler
MPI AutomotiveRRP$3749.44VF HSV Ute Maloo V8 3in CatBack Muffler/Muffler (SSMKHN0337) Fits HOLDEN. Fast shipping, warranty included.
View part
VF HSV V8 Sedan Wagon 3in Catback Muffler
MPI AutomotiveRRP$3749.44VF HSV V8 Sedan Wagon 3in Catback Muffler/Muffler (SKU: SSMKHN0333) Engineered. Quality guaranteed.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.