HSV VE E2 Sedan Wagon 3in Catback Muffler
MPI AutomotiveRRP$4027.11HSV VE E2 Sedan Wagon 3in Catback Muffler/Muffler (SKU: SSMKHN0178) Engineered. Quality guaranteed.
View partSSMBM496MF
Holden WM/WN Statesman Caprice V8 6.0L 2.5in Dual Rear Mufflers (Pair)
Holden WM/WN Statesman Caprice V8 6.0L 2.5in Dual Rear Mufflers (Pair) (SKU: SSMBM496MF) Engineered for a wide range.
BrandMantaMPI Automotive
Category: Mufflers and resonators
RRP $1546.02 AUD
In stock at supplierAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- SSMBM496MF
- Supplier
- MPI Automotive
- Category
- Mufflers and resonators
- Stock status
- In stock at supplier
Sized at 2.5in and supplied as a matched pair, the MPI Automotive SSMBM496MF is a set of dual rear mufflers listed to fit the Holden WM/WN Statesman and Caprice V8 6.0L. The 2.5in bore and rear-pair format are what define it.
What does the 2.5in bore suit?
At 2.5in these mufflers are sized for the 6.0L V8 Statesman and Caprice, matched to a long-wheelbase luxury car where the aim is a fuller note without the volume of a bigger straight-through system. The bore sets how much each rear muffler flows, and on a refined car like the Statesman it's chosen to keep the exit civilised rather than loud.
Why a dual rear pair?
Supplied as a pair, these form the final silencing stage on both sides of the WM/WN's dual system — the rear position sets the tone the car leaves with. On a Statesman or Caprice that means a refined exit suited to the car's character, with the matched pair keeping the twin-exit note balanced side to side after the upstream system has done its work.
Will it suit my Statesman or Caprice?
It's listed to fit the Holden WM/WN Statesman and Caprice V8 6.0L; confirm the exact build with the workshop before ordering so the dual rear pipework and hanger points match the long-wheelbase floorpan. The WM/WN are the long-wheelbase models, so the rear routing differs from the short-wheelbase Commodore and has to be matched.
What does fitting involve at our Illawarra workshop?
Oak Flats Muffler Men fits dual rear mufflers like this in-house across the Illawarra. We check the rear hangers, the clearance over the axle and the tip exits for the pair on the hoist, then book the bay once your build is confirmed. The RRP is listed, and we'll confirm the part suits your existing system before ordering it in.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- What size are the SSMBM496MF mufflers?
- They're 2.5in, sized for the 6.0L V8 Statesman and Caprice.
- Is this a pair?
- Yes — it's supplied as a pair of dual rear mufflers for both sides of the system.
- Does it fit my WM/WN Caprice?
- It's listed to fit the Holden WM/WN Statesman and Caprice V8 6.0L. Confirm your exact build with the workshop first.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More mufflers and resonators the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
Holden Commodore VE Ute & Maloo V8 3in Catback Muffler
MPI AutomotiveRRP$3830.49Holden Commodore VE Ute & Maloo V8 3in Catback Muffler/Muffler (SSMKHN0196) Fits HOLDEN. Fast.
View part
Holden Commodore VE V8 Sedan Wagon 3in Catback Muffler
MPI AutomotiveRRP$3830.49Holden Commodore VE V8 Sedan Wagon 3in Catback Muffler/Muffler (SSMKHN0170) Fits HOLDEN. Fast.
View part
HSV VE E2 Sedan Wagon 3in Catback Hotdog/Muffler
MPI AutomotiveRRP$3812.47HSV VE E2 Sedan Wagon 3in Catback Hotdog/Muffler (SKU: SSMKHN0179) Engineered. Quality guaranteed.
View part
VF HSV Ute Maloo V8 3in CatBack Muffler
MPI AutomotiveRRP$3749.44VF HSV Ute Maloo V8 3in CatBack Muffler/Muffler (SSMKHN0337) Fits HOLDEN. Fast shipping, warranty included.
View part
VF HSV V8 Sedan Wagon 3in Catback Muffler
MPI AutomotiveRRP$3749.44VF HSV V8 Sedan Wagon 3in Catback Muffler/Muffler (SKU: SSMKHN0333) Engineered. Quality guaranteed.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.