Does the SSMBM528MF fit both diesel engines?

It's listed for both the 2.5L four-cylinder and the 3.0L V6 turbo-diesel Pathfinder. Confirm your exact engine with the workshop.

Is this for petrol Pathfinders?

It's listed for the turbo-diesel variants. The workshop can advise if you have a different engine.

3in, sized for a free-flowing diesel system rather than a stock-size pipe.

SSMBM528MF

Nissan Pathfinder 2.5L 4cyl & 3.0L V6 Turbo Diesel 3in Rear Muffler

Nissan Pathfinder 2.5L 4cyl & 3.0L V6 Turbo Diesel 3in Rear Muffler (SSMBM528MF) Fits a wide range

BrandMantaMPI Automotive

Category: Mufflers and resonators

RRP $744.49 AUD

In stock at supplier

Request fitted quote Call the workshop

Afterpay, Zip Pay & Zip Money available

Nissan Pathfinder 2.5L 4cyl & 3.0L V6 Turbo Diesel 3in Rear Muffler product image

Part specs

SKU: SSMBM528MF
Supplier: MPI Automotive
Category: Mufflers and resonators
Stock status: In stock at supplier

The MPI Automotive SSMBM528MF is a 3in rear muffler for the turbo-diesel Nissan Pathfinder — the tail-end silencer listed for both the 2.5L four-cylinder and the 3.0L V6 turbo-diesel. It's the rear silencing stage for a diesel wagon, not a petrol V8.

What does a rear muffler do on a diesel Pathfinder?

On a turbo-diesel the rear muffler is the last silencing stage, and it shapes the note at the tailpipe and the drone you live with in the cabin. A 3in chambered muffler here flows freely for a diesel that breathes through a turbo while keeping the sound measured. It's the part owners replace when the factory unit rusts out or when they're building a larger-bore diesel system.

Why does the 3in bore suit these engines?

At 3in this rear muffler is sized for a free-flowing diesel system rather than a restrictive stock pipe — useful on a turbo-diesel that benefits from getting spent gas away cleanly. MPI Automotive lists it for the Nissan Pathfinder in both the 2.5L four-cylinder and 3.0L V6 turbo-diesel, so it covers the common diesel variants.

Will it suit my Pathfinder?

It's listed to fit the Nissan Pathfinder 2.5L 4-cylinder and 3.0L V6 turbo-diesel. Confirm your exact engine and that the rest of your system is 3in with the workshop before ordering, as diesel exhaust layouts vary by build.

What does fitting involve in the Illawarra?

Oak Flats Muffler Men fits these rear mufflers in-house. We check the 3in inlet matches your pipe, that the muffler hangs square under the floor, and that it clears the rear suspension and tow gear before sign-off.

Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.

Common questions

Does the SSMBM528MF fit both diesel engines?: It's listed for both the 2.5L four-cylinder and the 3.0L V6 turbo-diesel Pathfinder. Confirm your exact engine with the workshop.
Is this for petrol Pathfinders?: It's listed for the turbo-diesel variants. The workshop can advise if you have a different engine.
What bore is it?: 3in, sized for a free-flowing diesel system rather than a stock-size pipe.

Fitment support across the Illawarra

Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section

Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.

Book the right exhaust job without guessing.

Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.

Unit 2/8 Shaban St, Albion Park Rail NSW 2527 02 4256 3740 sales@mufflermen.com.au Send vehicle details