Chevrolet Silverado 1500 6.2L V8 Full Exhaust With HPC Coated
MPI AutomotiveRRP$9196.01MPI Automotive Chevrolet Silverado 1500 6.2L V8 Full Exhaust With HPC Coated Extractors, Cats With Quad Tips.
View partSSMKCH0002
Chevrolet Camaro 2018+ 6.2L V8 17/8in Coated Extractors & 3in Dual System with Valves
Chevrolet Camaro 2018+ 6.2L V8 17/8in Coated Extractors & 3in Dual System with Valves & 4in Tips.
BrandMantaMPI Automotive
Category: Extractors and headers
RRP $7034.27 AUD
In stock at supplierAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- SSMKCH0002
- Supplier
- MPI Automotive
- Category
- Extractors and headers
- Vehicle fitment
- Chevrolet
- Stock status
- In stock at supplier
The MPI Automotive SSMKCH0002 pairs 1-7/8in coated extractors with a 3in dual valved system and 4in tips for the 2018 Chevrolet Camaro 6.2L V8. It's a full header-back build listed to fit the 2018 Camaro 6.2L.
What does this system cover?
This is a header-back package: 1-7/8in coated extractors off the 6.2L V8, a 3in dual run rearward, and 4in tips at the exit. The valves let the system switch between a quieter and an opened-up flow path. It's a complete front-to-rear change for the Camaro rather than a tailpipe-only swap. MPI Automotive doesn't publish the extractor coating material or tip finish in this listing, so those are confirmed at the workshop.
What are extractors and what do the valves do?
Extractors replace the cast manifolds with tubular primaries — here 1-7/8in — to give each cylinder of the 6.2L a cleaner exit and a fuller note than the factory manifolds. The 3in dual pipework carries that flow back, and the valves open or close a path so you can run quieter around town or freer when you want it. It's louder than stock when open; the valves are about choice, not a single fixed character.
Will it suit my 2018 Camaro?
It's listed to fit the Chevrolet Camaro 6.2L V8 for 2018. The record names the make, engine and year but not the sub-model, so send your exact build and the workshop confirms the flange layout and rear clearances for the 4in tips before ordering. Listed to fit means we verify against your car.
What does fitting involve at our Illawarra workshop?
Oak Flats Muffler Men fits valved header-back systems like this in-house across the Illawarra. We check the extractor-to-head fit, route the 3in dual pipework, wire and test the valve operation, and set the 4in tips. At an RRP of $7,034.27 it's a special-order build, so we confirm availability and your fitment before committing the order.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- Is the SSMKCH0002 a valved system?
- Yes. It's a 3in dual valved system, so it can switch between a quieter and a more open flow path. It's louder than stock when the valves are open.
- What size are the extractors and tips?
- The extractors are 1-7/8in and the system finishes with 4in tips, listed for the 2018 Camaro 6.2L V8.
- Will it fit my Chevrolet Camaro?
- It's listed to fit the 2018 Camaro 6.2L V8. Confirm your exact build with the workshop before we order this one in.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
Chevrolet Silverado 1500 6.2L V8 Full Exhaust With HPC Coated Extractors
MPI AutomotiveRRP$8910.04Chevrolet Silverado 1500 6.2L V8 Full Exhaust With HPC Coated Extractors & Cats, quad tips - LOUD Op.
View part
Chevrolet Silverado 1500 ZR2 6.2L V8 Full Exhaust With HPC Coated
MPI AutomotiveRRP$8730.44Chevrolet Silverado 1500 ZR2 6.2L V8 Full Exhaust With HPC Coated Extractors, Cats Twin 3in Cat Back (SKU.
View part
Chevrolet Silverado 1500 6.2L V8 Full Exhaust With HPC Coated
MPI AutomotiveRRP$8730.44Chevrolet Silverado 1500 6.2L V8 Full Exhaust With HPC Coated Extractors, Cats and Twin 3in Cat Back (SKU.
View part
Chevrolet Silverado 1500 6.2L V8 Full Exhaust System inc Extractors
MPI AutomotiveRRP$8580.84MPI Automotive Chevrolet Silverado 1500 6.2L V8 Full Exhaust System inc Extractors & Cats, With Quad Tips.
View part
Chevrolet Silverado 1500 ZR2 6.2L V8 Full Exhaust With HPC Coated
MPI AutomotiveRRP$8444.47MPI Automotive Chevrolet Silverado 1500 ZR2 6.2L V8 Full Exhaust With HPC Coated Extractors & Cats - LOUD Option.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.