HSV VE E2 Sedan Wagon 3in Catback Muffler
MPI AutomotiveRRP$4027.11HSV VE E2 Sedan Wagon 3in Catback Muffler/Muffler (SKU: SSMKHN0178) Engineered. Quality guaranteed.
View partSSMKHN0117
Holden Commodore VT - VZ V8 Sedan 2.5in Dual Catback Muffler/Tailpipe
Holden Commodore VT - VZ V8 Sedan 2.5in Dual Catback Muffler/Tailpipe.
BrandMantaMPI Automotive
Category: Mufflers and resonators
RRP $1763.40 AUD
In stock at supplierAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- SSMKHN0117
- Supplier
- MPI Automotive
- Category
- Mufflers and resonators
- Vehicle fitment
- Holden
- Stock status
- In stock at supplier
The MPI Automotive SSMKHN0117 finishes in a muffler and tailpipe - a 2.5in dual cat-back listed for the Holden Commodore VT-VZ V8 Sedan. The muffler-to-tailpipe rear is its distinguishing feature: a single chambered silencer feeding the tailpipe across a dual 2.5in run.
What does the muffler-and-tailpipe rear change?
This SSMKHN0117 runs one muffler into a tailpipe rather than twin mufflers - a single chambered silencer with the tailpipe exit. That's the rear configuration that sets it apart on the dual 2.5in cat-back: a more open finish than a twin-muffler build while still quietening the VT-VZ V8.
Why a 2.5in dual on the VT-VZ V8?
The system splits the flow into two 2.5in pipes - a dual cat-back matched to the VT-VZ Commodore V8 Sedan's twin-outlet layout. The moderate 2.5in bore suits a standard or lightly-built engine, carrying the gas from the cat rearward through two paths. One muffler into the tailpipe is the more open of the VT-VZ sedan finishes while still quietening the V8.
What stays in place with a cat-back?
A cat-back replaces the exhaust from the catalytic converter back, leaving the factory cat upstream. On the VT-VZ sedan this is the dual 2.5in run from the cat rearward to the muffler and tailpipe - emissions hardware untouched.
What does fitting involve in the Illawarra?
Oak Flats Muffler Men supplies and fits 2.5in dual cat-backs like this in-house across the Illawarra. We confirm the muffler and tailpipe positions against your VT-VZ sedan, then book the bay once the build is verified. It's a special-order item, so we confirm the build and availability when you enquire, then place the order and book the bay once it's verified.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- What's the rear layout of the SSMKHN0117?
- Muffler-and-tailpipe - one chambered silencer feeding the tailpipe on a 2.5in dual cat-back for the VT-VZ V8 Sedan.
- Does it keep the cat?
- Yes. A cat-back replaces the exhaust from the cat rearward, so the factory cat stays upstream.
- Will it fit my VT-VZ sedan?
- It's listed for the Holden Commodore VT-VZ V8 Sedan. Confirm your exact build with the workshop first.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More mufflers and resonators the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
Holden Commodore VE Ute & Maloo V8 3in Catback Muffler
MPI AutomotiveRRP$3830.49Holden Commodore VE Ute & Maloo V8 3in Catback Muffler/Muffler (SSMKHN0196) Fits HOLDEN. Fast.
View part
Holden Commodore VE V8 Sedan Wagon 3in Catback Muffler
MPI AutomotiveRRP$3830.49Holden Commodore VE V8 Sedan Wagon 3in Catback Muffler/Muffler (SSMKHN0170) Fits HOLDEN. Fast.
View part
HSV VE E2 Sedan Wagon 3in Catback Hotdog/Muffler
MPI AutomotiveRRP$3812.47HSV VE E2 Sedan Wagon 3in Catback Hotdog/Muffler (SKU: SSMKHN0179) Engineered. Quality guaranteed.
View part
VF HSV Ute Maloo V8 3in CatBack Muffler
MPI AutomotiveRRP$3749.44VF HSV Ute Maloo V8 3in CatBack Muffler/Muffler (SSMKHN0337) Fits HOLDEN. Fast shipping, warranty included.
View part
VF HSV V8 Sedan Wagon 3in Catback Muffler
MPI AutomotiveRRP$3749.44VF HSV V8 Sedan Wagon 3in Catback Muffler/Muffler (SKU: SSMKHN0333) Engineered. Quality guaranteed.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.