HSV VE E2 Sedan Wagon 3in Catback Muffler
MPI AutomotiveRRP$4027.11HSV VE E2 Sedan Wagon 3in Catback Muffler/Muffler (SKU: SSMKHN0178) Engineered. Quality guaranteed.
View partSSMKHN0364
Holden Rodeo RA 3.0L SWB CRD With Cat & Without Muffler
Holden Rodeo RA 3.0L SWB CRD With Cat & Without Muffler.
BrandMantaMPI Automotive
Category: Mufflers and resonators
RRP $2826.78 AUD
In stock at supplierAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- SSMKHN0364
- Supplier
- MPI Automotive
- Category
- Mufflers and resonators
- Vehicle fitment
- Holden
- Stock status
- In stock at supplier
This is the common-rail one. The MPI Automotive SSMKHN0364 is built for the short-wheelbase Holden Rodeo RA 3.0L CRD — the common-rail diesel engine — and pairs a retained catalytic converter with a deleted rear muffler so the tail runs straight through.
What does the CRD common-rail spec change?
CRD marks this as the common-rail diesel Rodeo, and that's the defining detail of this listing. Common-rail and earlier non-common-rail engines route and flange differently at the front of the exhaust, so a system cut for the CRD won't share the same front geometry as a non-CR part. Get the engine designation right and the rest of the system lines up; get it wrong and the front join won't sit. This part is specific to the short-wheelbase CRD ute.
What does keeping the cat but losing the muffler do?
The converter stays, the rear muffler goes. With nothing chambered in the tail, the common-rail 3.0L breathes out through a straight-through back section for a fuller, harder note than the factory ute — while the emissions hardware that usually governs compliance stays in place. It's the louder option that still keeps the cat.
Is it road legal?
Because the SSMKHN0364 retains the catalytic converter, the emissions component that typically decides road compliance on a diesel ute is left in place. A muffler-delete is louder by design, though, so confirm the exact build and any state noise limits with the workshop before fitting.
How do we fit it at our Illawarra workshop?
Oak Flats Muffler Men supplies and fits this MPI Automotive system in-house across the Illawarra. We confirm the common-rail front join, set the straight-through tail and hangers for the short-wheelbase routing, and verify the fitment against your Rodeo before sign-off. The supplier RRP is AUD 2,826.78; it's ordered in once your CRD build is confirmed.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- What does CRD mean on this part?
- CRD is the common-rail diesel engine. The fitment differs from the non-common-rail version at the front of the system, so this listing is specific to the common-rail Rodeo.
- Does it keep the catalytic converter?
- Yes. The SSMKHN0364 retains the converter and deletes only the rear muffler, so the tail runs straight through.
- Which Rodeo is it for?
- The short-wheelbase Holden Rodeo RA 3.0L CRD. Confirm your exact build with the workshop before ordering.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More mufflers and resonators the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
Holden Commodore VE Ute & Maloo V8 3in Catback Muffler
MPI AutomotiveRRP$3830.49Holden Commodore VE Ute & Maloo V8 3in Catback Muffler/Muffler (SSMKHN0196) Fits HOLDEN. Fast.
View part
Holden Commodore VE V8 Sedan Wagon 3in Catback Muffler
MPI AutomotiveRRP$3830.49Holden Commodore VE V8 Sedan Wagon 3in Catback Muffler/Muffler (SSMKHN0170) Fits HOLDEN. Fast.
View part
HSV VE E2 Sedan Wagon 3in Catback Hotdog/Muffler
MPI AutomotiveRRP$3812.47HSV VE E2 Sedan Wagon 3in Catback Hotdog/Muffler (SKU: SSMKHN0179) Engineered. Quality guaranteed.
View part
VF HSV Ute Maloo V8 3in CatBack Muffler
MPI AutomotiveRRP$3749.44VF HSV Ute Maloo V8 3in CatBack Muffler/Muffler (SSMKHN0337) Fits HOLDEN. Fast shipping, warranty included.
View part
VF HSV V8 Sedan Wagon 3in Catback Muffler
MPI AutomotiveRRP$3749.44VF HSV V8 Sedan Wagon 3in Catback Muffler/Muffler (SKU: SSMKHN0333) Engineered. Quality guaranteed.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.